HP T5145 TeemTalk 7.0 User Manual - Page 203

IBM 3270 Printer Emulation Model Factory default: IBM-3287-1 (Printer) This enables you to specify the particular printer model to emulate. Telnet 3270 Regime Factory default: Unchecked Selecting this option will suppress Telnet 3270 regime support. Telnet 3270E Factory default: Unchecked Selecting this option will suppress TN3270E support. LU Connect Name Factory default: Unspecified This specifies the name of the device which the server will be requested to assign to the Telnet session. It may be used when requesting either a terminal or a printer session. You can return the local host name by entering %s after the device name. To return the user name, enter %u after the device name. You can specify how many characters of the name is returned in each case. For example, %.3s will return the first three characters of the local host name, and %-.3s will return the last three characters. To automatically assign a new device name for each successive connection, either enter %dN% after the name, where N is a decimal value, or %xN%, where N is a hexadecimal value. Each time the host requests the device name a counter will be substituted into the device name. If the host rejects the device name as in use the counter will be incremented modulus N and the name retried until all possibilities have been tried, at which point the emulation will report a device name rejected error. For example, TEST%d4% will give TEST1 on all connections until the host rejects the name as in use, in which case TEST2 will be used. If this is already in use then TEST3 is used, or if already in use then TEST0. These values are preserved over power off, so the Setup Options 187