HP T5145 TeemTalk 7.0 User Manual - Page 145

HP 700-92/96 Emulation keyboard entered spaces will cause the cursor to move forward without deleting characters that already exist. The latch can be deactivated by a tab, line feed or home-up command. This will cause spaces to overwrite existing characters as normal. InhEolWrp (C) Factory default: Unchecked The Inhibit End of line Wrap option determines whether characters wrap to the next line when the right margin is reached. When checked (i.e. inhibited), on reaching the right margin, the last character position will be overwritten with every new character received until a carriage return or other cursor movement command is issued. Line/Page (D) Factory default: Unchecked The setting of this option determines whether data is sent a line or a page at a time when in Edit mode. When this option is checked, data will be transmitted a line at a time. When unchecked, data will be transmitted a page at a time. Page data will either be from the beginning of display memory or from the current cursor position. InhHndShk (G) InhDC2 (H) Factory default: Unchecked The combined setting of these two options determine the type of handshaking used when blocks of data are transmitted to the host. One of three types of handshake may be used: 1 No handshake. Blocks of data are sent immediately when the relevant transmit key is pressed. 2 DC1 handshake. Data is only sent to the host when the host sends an ASCII DC1 control code to request it. Setup Options 129