HP T5145 TeemTalk 7.0 User Manual - Page 189

IBM 3270 Display Emulation case. For example, %.3s will return the first three characters of the local host name, and %-.3s will return the last three characters. To automatically assign a new device name for each successive connection, either enter %dN% after the name, where N is a decimal value, or %xN%, where N is a hexadecimal value. Each time the host requests the device name a counter will be substituted into the device name. If the host rejects the device name as in use the counter will be incremented modulus N and the name retried until all possibilities have been tried, at which point the emulation will report a device name rejected error. For example, TEST%d4% will give TEST1 on all connections until the host rejects the name as in use, in which case TEST2 will be used. If this is already in use then TEST3 is used, or if already in use then TEST0. These values are preserved over power off, so the first connection of any given power on may not be TEST1. Assume that the start point is random. When you achieve a TN3270E connection, the LU device name that you are connected as will be displayed on the status line. If the specified device is rejected by the server or host, then an error message box will be displayed indicating the reason. Bind Factory default: Unchecked When this option is checked the server is allowed to send the SNA Bind image and Unbind notification to the emulator. Responses Factory default: Unchecked Check this option to support positive and negative response handling. This allows the server to reflect to the emulator any and all definite, exception, and no response requests sent by the host application. Setup Options 173