HP T5145 TeemTalk 7.0 User Manual - Page 108
This emulation is based on the VT500 terminal, series and includes the HP function keys F1 - F8
UPC - 884962337769
View all HP T5145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
VT Series Emulations ANSI BBS mode the screen size is adjusted to 25 lines and the preferred character set is set to ANSI. AT 386 Provides compatibility with software designed to drive the AT&T AT 386 terminal. ATT4410 Provides compatibility with software designed to drive the AT&T Dataspeed 4410 terminal. Refer to the section "AT&T 4410 Emulation" on page 88 for details. Sco Console This is an emulation of the SCO UNIX box. VT PCTerm Provides compatibility with software designed for the PC Term mode supported by DEC. VT52 and VT100 These emulations enable you to run applications written for the DEC VT52 and VT100 terminals, respectively. VT100+ This emulation is an enhanced version of the VT100 emulation that provides additional functionality such as colours. It is the same as the VT-UTF8 emulation except that it only supports ASCII characters 0-127 (decimal). VT+HP220 This emulation is based on the VT500 terminal series and includes the HP function keys F1 - F8 (not user programmable). The terminal ID is set to VT220. VT510 7-Bit and VT510 8-Bit These emulations enable you to run applications written for the DEC VT320 terminal, the difference is in their treatment of 8-bit control codes. When VT510 7-Bit is selected, all 8-bit codes are converted to their 7-bit equivalents, whereas VT510 8Bit leaves 8-bit codes unchanged. If you are using VT200 applications, select VT510 7-Bit. 92 Setup Options