HP Z558 HP Digital Entertainment Center - User's Guide - Page 90
Satellite Connection
![]() |
UPC - 882780141766
View all HP Z558 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Satellite Connection One Satellite Receiver Connect the TV signal source from the satellite receiver into the HP Digital Entertainment Center. If you are using a satellite receiver (not provided) with S-video or composite video output, do the following: 1 Make sure that a coaxial cable connector from your dish source is plugged into the satellite receiver In connector. 2 Connect a video cable. a Choose a Video Out connector: ■ Coaxial (RF) ■ Video (composite) ■ S-video b Connect the video cable from the satellite receiver back panel video output connector. c Connect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector. 3 Connect stereo audio cables (skip this step if using coaxial [RF]): a From the satellite receiver back panel Audio Out right (red) connector and Audio Out left (white) connectors. b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors. 4 Connect the satellite receiver Infrared Transmitter cable (required for signal). See "Infrared Transmitter Connection" on page 88. 84 HP Digital Entertainment Center
![](/manual_guide/products/hewlettpackard-z558-hp-digital-entertainment-center-users-guide-7feb089/90.png)