Hitachi P50X901 Owners Guide - Page 15

First time use Rear Panel Connections ቭ CableCARD Slot This slot is for the CableCARD that will be provided by your local cable operator to gain access to chosen cable channels. The CableCARD will allow you to tune digital and high definition encrypted cable programming. Please call your local cable operator if this service is available before requesting a CableCARD (also known as Point of Deployment (POD) module). 1. Connect a coaxial cable to cable terminal of the Rear Panel Jacks. 2. Insert the CableCARD into the slot (Top of card should be facing towards you as shown below). Digital Cable Signal INSERT If the CableCARD is properly installed or removed, the TV will display the following respective screens. CableCARD is installed OR CableCARD is not installed After the CableCARD is installed, wait until the second screen below appears. Acquiring Data. Please wait. NOTE: 1. A digital cable subscription is required. 2. Do not insert a PCMCIA card into the CableCARD slot. In order to start cable service for this device, please contact your cable provider CableCARD(tm): 123-456-789-1 Host: 123-456-789-1 Data: 123-456-789-1 Unit Address: 123-456-789-1 Press EXIT to return Please take note of all information on the screen (you will provide this information to your cable operator). Call your cable operator and give them the information from the card to start your cable service. 15