Hitachi P50X901 Owners Guide - Page 6

First time use How to set up your new HITACHI Plasma Television AC CORD AND POWER SWIVEL CABLE INSTALLATION INSTRUCTION The AC cord and power swivel cable (P50X901 only) provided with your new Plasma Television need to be installed correctly to avoid their disconnection when rotating the TV on its Table Top Stand. Located on the back of the TV are 2 plastic clamps to hold the AC cord and power swivel cable. Please follow the instructions below. ³ Pass the AC cord through Clamp #1 and connect it to the TV. Pull on the clamp to tighten the AC cord to the TV. · Connect power swivel cable on one end to the swivel slot of the Plasma Rear Panel. Connect the other end to the swivel slot of the Table Top Stand Base (P50X901 only). » The AC cord, power swivel cable and the signal cables can all be held together with Clamp #2 (included on the accesories bag). ³ Clamp #1 : Pass the AC cord through this clamp ; then pull the clamp to tighten the AC cord to the TV. · Swivel slot on Table Top Stand Base (P50X901 only). AC CORD 6 · Swivel slot on Plasma Rear Panel (P50X901 only). » Clamp #2: Use this clamp to hold the AC cord, power swivel connector and the signal cables. Please assemble this Clamp on the middle hole of the base metal.