Hitachi P50X901 Owners Guide - Page 79
CURSOR PAD, SETUP, SELECT, CableCARD, Information, CableCARD Info - problem
View all Hitachi P50X901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Setup CableCARD Information After the CableCARD has been successfully installed, you can access CableCARD Information menu in the SETUP menu of the On-Screen Display. Follow the instructions below to access the CableCARD Information menu. 1. Press the MENU button on the Remote Control to access the Main Menu screen. 2. Use the CURSOR PAD ̄ to highlight SETUP in the Main Menu and press the SELECT button. 3. Use the CURSOR PAD ̄ to highlight CableCARD Information and press the SELECT button. 4. To view the CableCARD ID and Host ID, use the CURSOR PAD ̄ to highlight CableCARD Info and press the SELECT button. NOTE: The Diagnostics Info. window is for Service use only. THINGS TO CHECK WHEN USING THE CableCARD / CableCARD Services 1. Check that the CableCARD is properly inserted in the CableCARD slot. 2. Remove the CableCARD by pulling the CableCARD straight out. 3. Visually inspect the CableCARD to ensure all pinholes are in good condition, with none blocked or damaged. 4. Make sure the CableCARD is re-inserted in the correct direction, then slowly push until it is fully seated in the slot. 5. When the CableCARD is installed, note all screen messages that appear ("CableCARD Installed", "Acquiring Data", "CableCARD is not Installed"). If the "CableCARD Installed" message does not appear when card is installed, check the TV's card slot and CableCARD pins for obstructions or damage. 6. If problems still remain, please contact your Cable Service Provider. Video Audio TV Guide On Screen Channel Manager Locks Timers Setup Power Swivel Move SEL Select Setup Setup The Menu Options OR Set The Screen Saver Set The Inputs Set The AV Net Set The Closed Captions Set The IR Out CableCARD Information Select The Quick Start Option Reset The Software Move SEL Select Setup CableCARD Information Select the button below to acess CableCARD ID and Host ID. CableCARD Info. Select the button below to access OR CableCARD and Host Diagnostics. Diagnostics Info. Move SEL Return In order to start cable service for this device, please contact your cable provider CableCARD(tm): 123-456-789-1 Host: 123-456-789-1 Data: 123-456-789-1 Unit Address: 123-456-789-1 Press EXIT to return On-Screen Display NOTES: 1. 2. When a CableCARD is installed, Auto Channel scan will not be needed because the channel list is automatically loaded to the TV's channel memory. The TV will take several minutes to detect and recognize the presence of the CableCARD. This process must be completed before any CableCARD information or Channel listings is accessed. 79