Hitachi P50X901 Owners Guide - Page 57
Channel Manager
View all Hitachi P50X901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Channel Manager Channel Manager Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List. 1. Press CURSOR PAD ̆,̄ to highlight functions. 2. Press the SELECT button or CURSOR PAD ̈ to select. Video Audio TV Guide On Screen Channel Manager Locks Timers Setup Power Swivel Move SEL Select Channel Manager Signal Meter OR Auto Channel Scan Channel List Move SEL Select On-Screen Display Signal Meter Select SIGNAL METER when using an indoor or outdoor antenna. This feature will show the signal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal reception. Also this feature will show you the status of the Out Of Band (OOB) channel, if locked or unlocked as monitoring the noise rejection and the frequency values of the OOB channel. Use the CURSOR PADS and the SELECT button to highlight and select CLOSE to exit. NOTE: 1. The Signal Meter will not be available (grayed out) when watching analog channels. 2. The OOB options work only for CableCARD channels. Auto Channel Scan This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory. 1. Use the CURSOR buttons ̇ or ̈ to highlight AIR, CABLE (1) or CABLE(2) source. 2. Press the CURSOR buttons ̇ or ̈ to highlight the START or RESET option. 3. Press the SELECT button to select. NOTE: 1. If certain channels are poor or not possible in cable(1) mode, set cable source to cable(2) by using the CURSOR buttons ̇ or ̈. Channel Manager Signal Meter OR Auto Channel Scan Channel List Move SEL Select Channel Manager Signal Meter Channel 3 - 1 Strength 91 Peak 91 SNR 10 OOB Lock/Unlock Lock OOB SNR 60 dB OOB Frequency 105 MHz Close Move SEL Return Channel Manager Signal Meter Auto Channel Scan Channel List Move SEL Select Channel Manager Auto Channel Scan OR Source Air Auto Channel Scan Start Move SEL Return Reset 57