Hitachi P50X901 Owners Guide - Page 80

Setup On-Screen Display Select The Quick Start Option This feature will select QUICK START UP options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the QUICK START UP feature will activate the TV tuners circuits when the TV is in "standby mode" which is commonly referred to as "off". This will allow you to quickly tune to channels when first turning the TV on. Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected. Reset The Software This feature shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC/SD CARD). If a future software upgrade is required for your TV, HITACHI will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card. 1. Insert MMC/SD CARD. 2. Press the CURSOR PAD ̆ or ̄ to highlight UPGRADE NOW. Setup Setup The Menu Options OR Set The Screen Saver Set The Inputs Set The AV Net Set The Closed Captions Set The IR Out CableCARD Information Select The Quick Start Option Reset The Software Move SEL Select Setup Select The Quick Start Option Select ON to have the TV tune channels quickly at OR 1st turn on. Select OFF to save electricity Off On Move SEL Select Setup Setup The Menu Options OR Set The Screen Saver Set The Inputs Set The AV Net Set The Closed Captions Set The IR Out CableCARD Information Select The Quick Start Option Reset The Software Move SEL Select 3. Press the SELECT button to select and start upgrading. 4. Unplug the AC power cord or press the POWER button for 5 seconds (P60X901 only) when the UPGRADE is complete. (Only P50X901 model: MAIN POWER button OFF/ON operation can also complete UPGRADE). NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure. Setup Reset The Software OR MMC Software Upgrade : Vxxxx.xxxx Upgrade Now Please Insert MMC card before upgrading. Reset TV Settings No Yes (Select "Yes" to return all settings to the factory default after main power OFF/ON.) Move SEL Return Reset TV Settings This function allows you to Reset all TV Settings to the original factory settings on all modes during the next main power off/on. 1. Use CURSOR PAD ̆, ̄ to highlight functions. 2. Press the SELECT button or CURSOR PAD ̈ to select Reset the Software Menu. 3. Use the CURSOR PAD ̄ to access the Reset TV settings option. 4. Select the "YES" option to Reset ALL the TV functions and unplug the AC cord or press the POWER button for 5 seconds. NOTE: 1. If YES is selected, ALL TV MENU SETTINGS will be reset to the original factory settings on all modes when the AC cord is unplugged once or the POWER button is pressed for 5 seconds (P60X901 only). 2. When the Quick Start Option has been set to ON or TV Guide On ScreenTM is configured, the option of Reset TV Settings will not operate unless the AC cord is unplugged once or the POWER button is pressed for 5 seconds (P60X901 only). 3. (Only P50X901 model) MAIN POWER button OFF/ON operation can also enable this function. 80