Husqvarna AUTOMOWER 415X Owner Manual - Page 10

2 Safety

2.1 Safety definitions

Warnings, cautions and notes are used to point out

specially important parts of the manual.

WARNING:

Used if there is a risk of

injury or death for the operator or bystanders

if the instructions in the manual are not

obeyed.

CAUTION:

Used if there is a risk of

damage to the product, other materials or

the adjacent area if the instructions in the

manual are not obeyed.

Note:

Used to give more information that is necessary

in a given situation.

2.2 General safety instructions

WARNING:

Read the warning

instructions that follow before you use the

product.

•

Read the Operator’s manual carefully and make

sure you understand the instructions before you

use the product. Keep for future reference.

•

This appliance is not intended for use by children

or persons with reduced physical, sensory or

mental capabilities (that could affect a safe

handling of the product), or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

However, EU requirements allows this appliance

to be used by children aged from 8 years and

above and persons with reduced physical, sensory

or mental capabilities or lack of experience and

knowledge, if they have been given supervision

or instruction concerning use of the appliance in

a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by

children without supervision.

•

The product must only be used with the equipment

recommended by Husqvarna. All other types of

use are incorrect.

•

Do not use the product when persons, especially

children, or animals are in the work area.

•

Warning signs must be put around the work area

of the product if it operates in public areas. The

signs must have the text that follows: Warning!

Automatic lawn mower! Keep away from the

machine! Supervise children!

•

Do not touch moving hazardous parts, such as the

blade disc, before it has come to a complete stop.

•

Set the product to OFF before you clear a

blockage, do maintenance or examine the product,

and if the product starts to vibrate abnormally.

Examine the product for damage before you start

the product again. Do not use the product to it is

defective.

•

If an injury or accident occur, get medical aid.

•

Do not put power supply cable and extension cable

in the work area. This can cause damage to the

cables.

•

Do not connect a damaged cable or plug, or touch

a damaged cable, before it is disconnected from

the power outlet. Disconnect the plug from the

power outlet if the cable becomes damaged while

in operation. A worn or damaged cable increases

the risk of electrical shock. A damaged cable must

be replaced by service personnel.

•

When you connect the power supply to the power

outlet, use a residual-current device (RCD) with a

tripping current of maximum 30 mA.

•

Only charge the product in the included charging

station. For safe disposal of the battery, refer to

Disposal on page 47

. Incorrect use may result in

electric shock, overheating or leaking of corrosive

liquid from the battery. In the event of leakage of

electrolyte, flush with water/neutralizing agent. Get

medical aid if corrosive liquid comes in your eyes.

•

Use only original batteries recommended by

Husqvarna. Product safety cannot be guaranteed

with other than original batteries. Do not use non-

rechargeable batteries.

•

Follow the installation instructions that includes to

specify the work area, refer to

Installation of the

product on page 17

.

•

Follow the instructions about to start and operate

the product, refer to

Operation on page 31

.

•

If there is a risk of thunderstorm, Husqvarna

recommends that the power supply and all the

wires to the charging station are disconnected

to decrease the risk of damage to electrical

components. Connect the power supply and all

the wires again if there is no longer a risk of

thunderstorm. It is important that all wires are

connected correctly.

•

Follow the maintenance instructions and if

necessary use Husqvarna original spare parts,

refer to

Maintenance on page 33

.

•

For technical data such as weight, dimensions and

noise emission values, refer to

Technical data on

page 48

.

•

The operator is responsible for accidents or

dangers that occurs to other persons or property.

10

- Safety

1650 - 005 - 17.03.2022

Section	Page
Contents	2
Introduction	3
Introduction	3
Support	3
Product description	3
Mowing technique	3
Find the charging station	3
Automower® Connect	3
Automower® Intellegent Mapping (AIM)	3
Product overview	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	6
General manual instructions	6
Menu structure overview - 1	7
Menu structure overview - 2	8
Display	9
Keypad	9
Safety	10
Safety definitions	10
General safety instructions	10
Safety instructions for installation	11
Safety instructions for operation	11
Safety instructions for maintenance	11
Battery safety	11
How to lift and move the product	12
Installation	13
Introduction - Installation	13
Main components for installation	13
General preparations	13
Before the installation of the wires	13
To examine where to put the charging station	13
To examine where to put the power supply	14
To examine where to put the boundary wire	14
To put the boundary wire in a slope	15
Passages	16
To make an island	16
To make a secondary area	16
To examine where to put the guide wire	17
Work area examples	17
Installation of the product	17
Installation tools	17
To install the charging station	18
To install the boundary wire	18
To install the guide wire	18
To put the wire into position with stakes	19
To bury the boundary wire or the guide wire	19
To extend the boundary wire or the guide wire	19
After the installation of the product	20
To do a visual check of the charging station	20
To do the basic settings	20
Product settings	20
Automower® Connect app	20
To install the Automower® Connect app	20
To pair Automower® Connect and the product	21
Automower® Intellegent Mapping (AIM)	21
Download firmware over the air FOTA (Firmware over the air)	21
Product settings with keypad and display	21
To get access to the menu in the display of the product	21
Menu structure	21
Schedule	21
To set the schedule	21
Make an estimate of the necessary operating time	22
To copy the schedule setting	22
To reset the schedule setting	22
Cutting height	22
Adjust the cutting height	22
To set the cutting height	22
TargetHeight	22
To set the TargetHeight	22
Security level	23
To set the security level	23
To create a New loop signal	23
To change the PIN-code	23
To change the duration of the alarm	23
Messages	23
To read the messages	23
Weather timer	23
To set the Weather timer	24
To set the Weather timer frequency	24
Installation	24
GPS Assisted Navigation, Lawn Coverage and Systematic Passage Mowing	24
To set the GPS Assisted Navigation	24
To set the Lawn Coverage function	25
To set the System Passage Mowing function	25
To do a test of the Lawn Coverage function	25
To measure the distance from the charging station	25
To disable or enable the Lawn Coverage function	25
To reset the Lawn Coverage settings	26
Methods for the product to find the charging station	26
To set how the product finds the charging station	26
To do a test of the guide wire	26
To do a test of the boundary wire	26
To change the signal range of the charging station	26
Corridor width	27
To set the corridor width	27
Reversing distance	27
To set the reversing distance	27
Drive Past Wire function	27
To set the Drive Past Wire function	27
Settings	27
ECO mode	27
To set the ECO mode	27
Spiral Cutting	28
To set the Spiral Cutting	28
To set the level of Spiral Cutting	28
General	28
To set the time & date	28
To set the language	28
To set the Country & Timezone	28
To set the unit format	28
To reset all user settings	28
Frost Guard	28
To set the Frost Guard	28
The About menu	29
Accessories	29
Information	29
Automower® Connect	29
To enable the GeoFence function	29
To set a new center point for the Geofence function	29
To set the GeoFence level of sensitivity	29
To avoid collisions with the Automower® house	29
Headlights Automower® 405X/415X	29
To set the schedule for the headlights	29
To set the Flashes when fault function	29
Operation	31
To use the ON/OFF button	31
To start the product	31
Operating modes - Start	31
Main area	31
Secondary area	31
Override schedule	31
Spot cutting	31
To park the product	31
Operating modes - Park	32
Park until further notice	32
Start again with next schedule	32
To stop the product	32
To set the product to OFF	32
To charge the battery	32
Maintenance	33
Introduction - maintenance	33
Clean the product	33
To clean the chassis and blade disc	33
To clean the wheels	34
To clean the body of the product	34
To clean the charging station	34
Replacement of the blades	34
To replace the blades	34
Battery	35
Winter service	35
Troubleshooting	36
Introduction - troubleshooting	36
Fault messages	36
Information and warning messages	41
Indicator lamp in the charging station	42
Symptoms	43
Find breaks in the loop wire	44
Transportation, storage and disposal	47
Transportation	47
Storage	47
Disposal	47
To remove the battery	47
Technical data	48
Automower® 405X/415X	48
Registered trademarks	50
Warranty	51

Husqvarna AUTOMOWER 415X Owner Manual - Page 10

Safety definitions, WARNING, CAUTION, 2 General safety instructions

Page 10 highlights