Home » Husqvarna Manuals » Lawn Mowers » Husqvarna AUTOMOWER 415X » Manual Viewer

Husqvarna AUTOMOWER 415X Owner Manual - Page 5

Symbols on the product, 4 Symbols on the display

View all Husqvarna AUTOMOWER 415X manuals

Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

1.3 Symbols on the product These symbols can be found on the product. Study them carefully. WARNING: Read the user instructions before operating the product. The low-voltage cable must not be shortened, extended or spliced. Do not use a trimmer nearby the lowvoltage cable. Be careful when trimming edges where the cables are placed. WARNING: Disable the product before working on or lifting the product. WARNING: Keep a safe distance from the product when operating. Keep your hands and feet away from the rotating blades. WARNING: Do not ride on the product. Do not put your hands or feet close to or under the product. Lock function. Use a detachable power supply as defined on the rating label next to the symbol. 1.4 Symbols on the display In the schedule menu you can set when the product will cut the lawn. In the cutting height menu you can set the cutting height of the product. In the security menu you can select between 3 security levels for the product. In the messages menu you can find the Fault messages and Info messages of the product. The Weather timer function automatically adapts the cutting intervals to the grass growth. This product conforms to the applicable EC Directives. This product complies with the applicable UK Directives. It is not permitted to dispose this product as normal household waste. Ensure that the product is recycled in accordance with local legal requirements. The chassis contains components which are sensitive to electrostatic discharge (ESD). The chassis must also be resealed in a professional manner. For these reasons the chassis shall only be opened by authorized service technicians. A broken seal can result in the entire or parts of the guarantee no longer being valid. In the installation menu you can set manual settings for the installation of the product. In the settings menu you can set the general settings of the product. In the accessories menu you can set the settings for the accessories of the product. The schedule is set for the product to not cut the grass. The product overrides the schedule. 1650 - 005 - 17.03.2022 Introduction - 5

Section	Page
Contents	2
Introduction	3
Introduction	3
Support	3
Product description	3
Mowing technique	3
Find the charging station	3
Automower® Connect	3
Automower® Intellegent Mapping (AIM)	3
Product overview	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	6
General manual instructions	6
Menu structure overview - 1	7
Menu structure overview - 2	8
Display	9
Keypad	9
Safety	10
Safety definitions	10
General safety instructions	10
Safety instructions for installation	11
Safety instructions for operation	11
Safety instructions for maintenance	11
Battery safety	11
How to lift and move the product	12
Installation	13
Introduction - Installation	13
Main components for installation	13
General preparations	13
Before the installation of the wires	13
To examine where to put the charging station	13
To examine where to put the power supply	14
To examine where to put the boundary wire	14
To put the boundary wire in a slope	15
Passages	16
To make an island	16
To make a secondary area	16
To examine where to put the guide wire	17
Work area examples	17
Installation of the product	17
Installation tools	17
To install the charging station	18
To install the boundary wire	18
To install the guide wire	18
To put the wire into position with stakes	19
To bury the boundary wire or the guide wire	19
To extend the boundary wire or the guide wire	19
After the installation of the product	20
To do a visual check of the charging station	20
To do the basic settings	20
Product settings	20
Automower® Connect app	20
To install the Automower® Connect app	20
To pair Automower® Connect and the product	21
Automower® Intellegent Mapping (AIM)	21
Download firmware over the air FOTA (Firmware over the air)	21
Product settings with keypad and display	21
To get access to the menu in the display of the product	21
Menu structure	21
Schedule	21
To set the schedule	21
Make an estimate of the necessary operating time	22
To copy the schedule setting	22
To reset the schedule setting	22
Cutting height	22
Adjust the cutting height	22
To set the cutting height	22
TargetHeight	22
To set the TargetHeight	22
Security level	23
To set the security level	23
To create a New loop signal	23
To change the PIN-code	23
To change the duration of the alarm	23
Messages	23
To read the messages	23
Weather timer	23
To set the Weather timer	24
To set the Weather timer frequency	24
Installation	24
GPS Assisted Navigation, Lawn Coverage and Systematic Passage Mowing	24
To set the GPS Assisted Navigation	24
To set the Lawn Coverage function	25
To set the System Passage Mowing function	25
To do a test of the Lawn Coverage function	25
To measure the distance from the charging station	25
To disable or enable the Lawn Coverage function	25
To reset the Lawn Coverage settings	26
Methods for the product to find the charging station	26
To set how the product finds the charging station	26
To do a test of the guide wire	26
To do a test of the boundary wire	26
To change the signal range of the charging station	26
Corridor width	27
To set the corridor width	27
Reversing distance	27
To set the reversing distance	27
Drive Past Wire function	27
To set the Drive Past Wire function	27
Settings	27
ECO mode	27
To set the ECO mode	27
Spiral Cutting	28
To set the Spiral Cutting	28
To set the level of Spiral Cutting	28
General	28
To set the time & date	28
To set the language	28
To set the Country & Timezone	28
To set the unit format	28
To reset all user settings	28
Frost Guard	28
To set the Frost Guard	28
The About menu	29
Accessories	29
Information	29
Automower® Connect	29
To enable the GeoFence function	29
To set a new center point for the Geofence function	29
To set the GeoFence level of sensitivity	29
To avoid collisions with the Automower® house	29
Headlights Automower® 405X/415X	29
To set the schedule for the headlights	29
To set the Flashes when fault function	29
Operation	31
To use the ON/OFF button	31
To start the product	31
Operating modes - Start	31
Main area	31
Secondary area	31
Override schedule	31
Spot cutting	31
To park the product	31
Operating modes - Park	32
Park until further notice	32
Start again with next schedule	32
To stop the product	32
To set the product to OFF	32
To charge the battery	32
Maintenance	33
Introduction - maintenance	33
Clean the product	33
To clean the chassis and blade disc	33
To clean the wheels	34
To clean the body of the product	34
To clean the charging station	34
Replacement of the blades	34
To replace the blades	34
Battery	35
Winter service	35
Troubleshooting	36
Introduction - troubleshooting	36
Fault messages	36
Information and warning messages	41
Indicator lamp in the charging station	42
Symptoms	43
Find breaks in the loop wire	44
Transportation, storage and disposal	47
Transportation	47
Storage	47
Disposal	47
To remove the battery	47
Technical data	48
Automower® 405X/415X	48
Registered trademarks	50
Warranty	51

Match case Limit results 1 per page

1.3 Symbols on the product

These symbols can be found on the product. Study them

carefully.

WARNING:

Read the user

instructions before operating

the product.

WARNING:

Disable the prod-

uct before working on or lift-

ing the product.

WARNING:

Keep a safe dis-

tance from the product when

operating. Keep your hands

and feet away from the rotat-

ing blades.

WARNING:

Do not ride on

the product. Do not put your

hands or feet close to or un-

der the product.

Lock function.

Use a detachable power sup-

ply as defined on the rating

label next to the symbol.

This product conforms to the applicable

EC Directives.

This product complies with the applicable

UK Directives.

It is not permitted to dispose this product

as normal household waste. Ensure that

the product is recycled in accordance with

local legal requirements.

The chassis contains components which

are sensitive to electrostatic discharge

(ESD). The chassis must also be resealed

in a professional manner. For these

reasons the chassis shall only be opened

by authorized service technicians. A

broken seal can result in the entire or

parts of the guarantee no longer being

valid.

The low-voltage cable must not be

shortened, extended or spliced.

Do not use a trimmer nearby the low-

voltage cable. Be careful when trimming

edges where the cables are placed.

1.4 Symbols on the display

In the schedule menu you can set when

the product will cut the lawn.

In the cutting height menu you can set the

cutting height of the product.

In the security menu you can select

between 3 security levels for the product.

In the messages menu you can find the

Fault messages

and

Info messages

of the

product.

The Weather timer function automatically

adapts the cutting intervals to the grass

growth.

In the installation menu you can set

manual settings for the installation of the

product.

In the settings menu you can set the

general settings of the product.

In the accessories menu you can set the

settings for the accessories of the product.

The schedule is set for the product to not

cut the grass.

The product overrides the schedule.

1650 - 005 - 17.03.2022

Introduction -