Husqvarna AUTOMOWER 415X Owner Manual - Page 25

1.

Do steps 1–3 in

To get access to the menu in the

display of the product on page 21

.

2.

Use the

arrow

buttons and the

OK

button to move

through the menu structure

Installation > Lawn

coverage

.

3.

Push the

OK

button to enble or disable the

function.

4.

Push the

BACK

button.

To set the Lawn Coverage function

1.

Do steps 1–3 in



.

2.

Use the

arrow

buttons and the

OK

button to

move through the menu structure

Settings > Lawn

Coverage > Area 1-3

.

3.

Use the

arrow

button to select the area.

4.

Push the

OK

button.

5.

Measure the distance from the charging station

to the start of the area. Measure along the guide

wire. Refer to

To measure the distance from the

charging station on page 25

.

6.

Push the

arrow

buttons to select the distance,

measured in m.

7.

Push the

OK

button.

8.

Use the

arrow

buttons to select the percentage of

the cutting time the product must cut the area. The

percentage is equal to the percentage of the area

in relation to the complete work area.

a)

Measure the area.

b)

Divide the measured area with the total work

area.

c)

Convert the result to percentage.

Note:

The sum of Area 1-3 must be 100% or

less. If the sum is less than 100%, the product

sometimes straddles the guide wire and starts to

mow at the charging station.

9.

Push the

BACK

button.

To set the System Passage Mowing function

Note:

To prevent that the grass in the narrow

passage is worn, Husqvarna recommends to set a low

percentage for the

Systematic Passage Mowing

.

1.

Do steps 1–3 in



.

2.

Use the

arrow

buttons and the

OK

button to


Settings > Lawn

Coverage > Area 1-3

.

3.

Use the

arrow

buttons to select the area.

4.

Push the

OK

button.

5.

Measure the distance from the charging station

to the beginning of the narrow passage. Measure

along the guide wire. Refer to

To measure the

distance from the charging station on page 25

.

Note:

Make sure that the distance to the

Systematic Passage Mowing

is set inside the

narrow passage.

6.

Push the

arrow

buttons to select the distance.

7.

Push the

OK

button.

8.

Use the

arrow

buttons to select the % of the

cutting time that the product must start the narrow

passage cutting.

9.

Use the

arrow

buttons and the

OK

button to select

More > Systematic Passage Mowing

.

10.

Push the

OK

button to enable

Systematic Passage

Mowing

.

11.

Push the

BACK

button.

To do a test of the Lawn Coverage function

1.

Put the product in the charging station.

2.

Do step 1-3 in



.

3.

Use the

arrow

buttons and the

OK

button to


Settings > Lawn

Coverage > Area > More > Test

.

4.

Push the

OK

button.

5.

Push the

START

button.

6.

Close the hatch.

7.

Make sure the product can find the area.

To measure the distance from the charging station

1.

Put the product in the charging station.

2.

Do steps 1–3 in



.

3.

Use the

arrow

buttons and the

OK

button to


Settings > Lawn

Coverage > Area > How far?

4.

Use the

arrow

buttons to set 500 m / 500 yd as a

distance.

5.

Push the

OK

button.

6.

Use the

arrow

buttons and the

OK

button to


Settings > Lawn

Coverage > Area > More > Test

.

7.

Push the

OK

button.

8.

Push the

STOP

button when the product is at

the distance you select to measure. The distance

shows in the display.

To disable or enable the Lawn Coverage function

Disable or enable the

Lawn Coverage

function for each

area.

1.

Do steps 1–3 in



.

1650 - 005 - 17.03.2022

Installation -

25

Section	Page
Contents	2
Introduction	3
Introduction	3
Support	3
Product description	3
Mowing technique	3
Find the charging station	3
Automower® Connect	3
Automower® Intellegent Mapping (AIM)	3
Product overview	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	6
General manual instructions	6
Menu structure overview - 1	7
Menu structure overview - 2	8
Display	9
Keypad	9
Safety	10
Safety definitions	10
General safety instructions	10
Safety instructions for installation	11
Safety instructions for operation	11
Safety instructions for maintenance	11
Battery safety	11
How to lift and move the product	12
Installation	13
Introduction - Installation	13
Main components for installation	13
General preparations	13
Before the installation of the wires	13
To examine where to put the charging station	13
To examine where to put the power supply	14
To examine where to put the boundary wire	14
To put the boundary wire in a slope	15
Passages	16
To make an island	16
To make a secondary area	16
To examine where to put the guide wire	17
Work area examples	17
Installation of the product	17
Installation tools	17
To install the charging station	18
To install the boundary wire	18
To install the guide wire	18
To put the wire into position with stakes	19
To bury the boundary wire or the guide wire	19
To extend the boundary wire or the guide wire	19
After the installation of the product	20
To do a visual check of the charging station	20
To do the basic settings	20
Product settings	20
Automower® Connect app	20
To install the Automower® Connect app	20
To pair Automower® Connect and the product	21
Automower® Intellegent Mapping (AIM)	21
Download firmware over the air FOTA (Firmware over the air)	21
Product settings with keypad and display	21
To get access to the menu in the display of the product	21
Menu structure	21
Schedule	21
To set the schedule	21
Make an estimate of the necessary operating time	22
To copy the schedule setting	22
To reset the schedule setting	22
Cutting height	22
Adjust the cutting height	22
To set the cutting height	22
TargetHeight	22
To set the TargetHeight	22
Security level	23
To set the security level	23
To create a New loop signal	23
To change the PIN-code	23
To change the duration of the alarm	23
Messages	23
To read the messages	23
Weather timer	23
To set the Weather timer	24
To set the Weather timer frequency	24
Installation	24
GPS Assisted Navigation, Lawn Coverage and Systematic Passage Mowing	24
To set the GPS Assisted Navigation	24
To set the Lawn Coverage function	25
To set the System Passage Mowing function	25
To do a test of the Lawn Coverage function	25
To measure the distance from the charging station	25
To disable or enable the Lawn Coverage function	25
To reset the Lawn Coverage settings	26
Methods for the product to find the charging station	26
To set how the product finds the charging station	26
To do a test of the guide wire	26
To do a test of the boundary wire	26
To change the signal range of the charging station	26
Corridor width	27
To set the corridor width	27
Reversing distance	27
To set the reversing distance	27
Drive Past Wire function	27
To set the Drive Past Wire function	27
Settings	27
ECO mode	27
To set the ECO mode	27
Spiral Cutting	28
To set the Spiral Cutting	28
To set the level of Spiral Cutting	28
General	28
To set the time & date	28
To set the language	28
To set the Country & Timezone	28
To set the unit format	28
To reset all user settings	28
Frost Guard	28
To set the Frost Guard	28
The About menu	29
Accessories	29
Information	29
Automower® Connect	29
To enable the GeoFence function	29
To set a new center point for the Geofence function	29
To set the GeoFence level of sensitivity	29
To avoid collisions with the Automower® house	29
Headlights Automower® 405X/415X	29
To set the schedule for the headlights	29
To set the Flashes when fault function	29
Operation	31
To use the ON/OFF button	31
To start the product	31
Operating modes - Start	31
Main area	31
Secondary area	31
Override schedule	31
Spot cutting	31
To park the product	31
Operating modes - Park	32
Park until further notice	32
Start again with next schedule	32
To stop the product	32
To set the product to OFF	32
To charge the battery	32
Maintenance	33
Introduction - maintenance	33
Clean the product	33
To clean the chassis and blade disc	33
To clean the wheels	34
To clean the body of the product	34
To clean the charging station	34
Replacement of the blades	34
To replace the blades	34
Battery	35
Winter service	35
Troubleshooting	36
Introduction - troubleshooting	36
Fault messages	36
Information and warning messages	41
Indicator lamp in the charging station	42
Symptoms	43
Find breaks in the loop wire	44
Transportation, storage and disposal	47
Transportation	47
Storage	47
Disposal	47
To remove the battery	47
Technical data	48
Automower® 405X/415X	48
Registered trademarks	50
Warranty	51

Husqvarna AUTOMOWER 415X Owner Manual - Page 25

Coverage > Area > More > Test

Page 25 highlights