IBM QS21 Service Guide - Page 101
corrupted.
![]() |
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Table 14. SAS boot errors (continued) Code Message Description Action E4308 SAS disk device node not found! The Open Firmware Device Tree (see Try following steps in order to fix the IEEE 1275) become corrupted. It might problem: indicate a blade firmware problem. 1. Reboot the blade. 2. Power down then remove and reinstall the blade server in the BladeCenter unit. 3. If the error started after a SAS Expansion Card firmware upgrade or a blade server firmware upgrade, consider a rollback to the previous firmware versions. Check with the documentation at http://www.ibm.com/systems/ bladecenter/support/ to verify whether rollback is possible. 4. If the error has started reporting after an Open Firmware script change, for example in a custom startup script, verify the script. 5. If the error started after activating an Open Firmware script, for example by setting the use-nvramrc? configuration variable, verify the script. 6. Reproduce the blade server Open Firmware environment (firmware version, scripts, configuration variables, hardware configuration etc.) with another blade server(s). 7. If the error started after a hardware component was added or removed, consider a rollback to the original hardware configuration. Chapter 5. Diagnostics and troubleshooting 83
![](/manual_guide/products/ibm-qs21-service-guide-e5564bd/101.png)