IBM QS21 Service Guide - Page 91
Message, Description, Action, Sequence
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Table 9. System firmware boot list errors (continued) Code Message Description Action E3403 Bad executable: The file loaded from the boot device is not a valid PPC executable ELF file. The string provides more details about the file type. Using the Advanced Management Module correct the boot device configuration. Select a valid boot device and executable path E3404 Not a bootable device! The system cannot load an executable file from this device. Using the Advanced Management Module correct the boot device configuration. Select a valid boot device and executable path. E3405 No such device The specified boot device is currently not present or not ready for access. Check the hardware device or use the Advanced Management Module to correct the system configuration. E3406 Client application returned an error: E3407 Load failed E3408 Failed to claim memory for the executable E3409 Unknown FORTH Word E3410 Boot list successfully read from VPD but no useful information received. If the problem persists, contact your IBM service representative. The OS or a standalone application returned an error code to the system firmware. The string provides the error description Based on the string you may have to take an action on faulty hardware or use the Advanced Management Module to correct the system configuration. It may be needed to perform the firmware or OS upgrade to resolve compatibility issues. If the problem persists, contact your IBM service representative. Load or boot failed to load requested file from the device. This is informational message and may be preceded by one or more other error messages. Based on the preceding error messages you may have to take an action on faulty hardware or use the Advanced Management Module to correct the system configuration An attempt to load executable file from the boot device failed due to insufficient memory or firmware problem. Verify that loaded file was indeed the right executable intended to boot this system. If not, using the Advanced Management Module correct the system configuration. Otherwise, contact your IBM service representative. You may need to add more memory to the system or to perform the firmware upgrade. Internal code error, or compatibility Contact your IBM service issue. representative. You may need to perform the firmware upgrade. The firmware found a valid VPD but was not able to find bootable code on any of the devices listed in it. Use Advanced Management Module Web browser to specify at least one device that contains bootable code. From the Advanced Management Module Web interface, choose BladeTasks>Configuration>Boot Sequence. Chapter 5. Diagnostics and troubleshooting 73