IBM QS21 Service Guide - Page 93
Memory, initialization, errors
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Memory initialization errors The following table describes the memory initialization errors that can occur during boot. Table 11. Memory initialization errors Code Message E1006 Memory Incomplete. Description Not all the XDR system memory could be initialized. Action The blade server can still boot but with reduced system memory. Power down then reboot the blade. E1100 E1110 System memory init failure. Boot abort. System memory test failure. Boot abort. If this does not resolve the problem, contact your IBM service representative as the system board may need replacing. The system XDR memory could Power down then reboot the not be initialized. The boot process blade. has aborted. If this does not resolve the problem, contact your IBM service representative as the system board may need replacing. An error has occurred while testing Power down then reboot the the XDR memory. blade. E1200 System memory init failure during second-pass calibration. CPU halted. E1210 Memory controller failed. CPU halted. W1250 Timing Calibration failed: BE... YRAC... DQ... pin... Note: indicates the number of the pin where the error has occurred. If this does not resolve the problem, contact your IBM service representative as the system board may need replacing. Since the first-pass calibration Power down then reboot the succeeded, either the CPU or the blade. system XDR memory could have a defective contact. If this does not resolve the problem, contact your IBM service representative as the system board may need replacing. The built-in memory controller of the CPU encountered an unexpected error. Power down then reboot the blade. If this does not resolve the problem, contact your IBM service representative as the system board may need replacing. This warning message accompanies a later memory initialization error message and lists the pin number for help in locating the cause of the error. See the accompanying memory initialization error message for further information. USB errors The following table describes boot list errors. These may occur when booting from a bootable CD or DVD. Chapter 5. Diagnostics and troubleshooting 75