IBM QS21 Service Guide - Page 73
Color, Board, location, Explanation, Comments, Status, Light
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table 4. System board LEDs LED Status LEDs Heartbeat Alert Color Green Yellow Ethernet 1 activity Green Ethernet 0 activity Green BE0_PLL_LOCK Green BE1_PLL_LOCK Green MM_SELECT_A Green MM_SELECT_B Green Light path LEDs DIMM at JDIM11 error DIMM at JDIM10 error DIMM at JDIM01 error DIMM at JDIM00 error Yellow Yellow Yellow Yellow Light box LEDs Board location Explanation Comments The status LEDs are listed for D16 Indicates the BMC is functional. reasons of completeness since they are for use by IBM service D15 Indicates an error condition has only and are not normally visible. occurred on the system board. They are not activated by the light D12 Indicates Ethernet 1 is active and path diagnostics switch. sending or receiving packets. D11 Indicates Ethernet 0 is active and sending or receiving packets. D8 Indicates the phased lock loop of Cell/B.E.-0 is working. D13 Indicates the phased lock loop of Cell/B.E.-1 is working. D19 Indicates Advanced Management Module A is active. D18 Indicates Advanced Management Module B is active. D21 There has been a failure in the Either remove or replace the I/O DIMM module. DIMM and reboot. D20 See Figure 26 on page 54 for the location of each DIMM and its D10 associated LED. D7 Chapter 5. Diagnostics and troubleshooting 55