IBM QS21 Service Guide - Page 124
administrator
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
PowerPC Firmware Version HEAD SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved. FRU Information Machine Type and Model: 079338x Machine Serial Number: ABCDEFG Universal Unique ID: 12345678-1234-1234-1234-123456789ABC Navigation Keys: M = return to Main Menu ESC key = return to previous screen X = eXit System Management Services Select Navigation key : Adding FRU information When you replace a FRU details are not recorded in the VPD. You must enter them manually through SMS. When the system firmware detects an FRU replacement part during boot the process stops to allow you to enter the machine type or model and serial number. Boot does not continue until the information is provided. To enter new FRU information, complete the following steps: 1. Using a Telnet or SSH client, connect to the Advanced Management Module external Ethernet interface IP address. 2. When prompted, enter a valid user ID and password. The default management module user ID is USERID, and the default password is PASSW0RD, where the 0 is a zero. Note: The userid and password may have been changed. If so, check with the system administrator for a valid user id and password. 3. Power cycle the blade and start an SOL console by using the power -cycle -c command. See "Using the SMS utility program" on page 11 for further information. 4. The following screen appears: 106 BladeCenter QS21 Type 0792: Problem Determination and Service Guide