IBM QS21 Service Guide - Page 74
Color, Board, location, Explanation, Comments
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Table 4. System board LEDs (continued) LED Color Board location Explanation Temperature fault Yellow Light box The blade server has exceeded the operational temperature range. Comments v Using the Advanced Management Module, check that the BladeCenter unit cooling system is operating correctly. v Replace any missing filler blades in the BladeCenter unit. v Replace any missing filler blades in the BladeCenter QS21 DIMM sockets. v Check that other blade servers are operating within the recommended temperature range. v Replace the blade server, power on and boot. Check Advanced Management Module for errors. NMI error Yellow CPU fail Yellow System board Yellow Light path diagnostics Green If the problem persists, contact your IBM service representative as the system board may need servicing. The NMI pinhole reset on the front panel has been pressed. Pressing the reset causes the operating system to call the system debugger. One of the Cell BE processors has failed. Contact your IBM service representative as the system board needs replacement. A critical error has occurred in a Contact your IBM service component on the system board. representative as the system board may need replacing. Lights when the light path diagnostics switch is pressed. Indicates that the capacitor is charged and the light path LEDs can light to show any errors. If this LED does not light then the light path LEDs cannot function. Reinstall the blade server in the BladeCenter unit and power on to recharge. If this fails to resolve the problem, there is a problem with the system board and it may need replacement. 56 BladeCenter QS21 Type 0792: Problem Determination and Service Guide