Icom IC-7410 Instruction Manual - Page 10
Noise Blanker Switch [nb], Noise Blanker Level Control [nb]
![]() |
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1 PANEL DESCRIPTION ■ Front panel (continued) @0 !9 !8 !7 @1 @2 @3 @4 @5 @6 @7 @8 @9 #0 #1 #2 !7 NOISE BLANKER SWITCH [NB] (p. 60) ➥ Push to turn the Noise Blanker ON or OFF. The Noise Blanker reduces pulse-type noise such as that generated by vehicle ignition systems. The Noise Blanker cannot be used in the FM mode, and is not effective for non-pulse-type noise. • "NB" appears when the Noise Blanker is ON. ➥ Hold down for 1 second to display the "NB" screen. Push to return to the previous screen display. !8 N OISE BLANKER LEVEL CONTROL [NB] (outer control; p. 60) Rotate to adjust the noise blanker threshold level when the Noise Blanker is ON. Set for maximum readability. • To use this control, first push [NB] (!7). Increases Decreases !9 N OISE REDUCTION LEVEL CONTROL [NR] (inner control; p. 61) Rotate to adjust the DSP noise reduction level when the Noise Reduction is ON. Set for maximum readability. • To use this control, first push [NR] (@0). Increases @1 TX INDICATOR Lights red while transmitting. @2 F UNCTION SWITCHES [F1]-[F5] (pp. 13, 14) Push to select the function which is indicated on the LCD display above each switch. • The functions vary, depending on the selected menu and the operating mode. @3 MENU SWITCH [MENU] (pp. 13, 14) ➥ Push to change the set of functions assigned to switches ([F-1] to [F-5]). • Toggles between the function menus, M1 (Menu 1) and M2 (Menu 2). ➥ Hold down for 1 second to enter the Set mode. Push to return to the previous screen display. @4 MODE SWITCHES Push to select your desired operating mode. (p. 31) • The built-in speech synthesizer announces the selected mode when the "SPEECH [MODE] SW" item is set to "ON" in the Set mode. (p. 87) [SSB] ➥ Push to alternately select the USB or LSB modes. • "USB" or "LSB" appears. ➥ In the SSB mode, hold down for 1 second to select the SSB data mode (USB-D, LSB-D). • "D" appears in addition to "USB" or "LSB." ➥ In the SSB data mode, push to return to the normal SSB mode. Decreases @0 N OISE REDUCTION SWITCH [NR] (p. 61) Push to turn DSP Noise Reduction ON or OFF. • "NR" appears when Noise Reduction is ON. 3 [CW] Push to alternately select the CW and CW-R (CW reverse) modes. • "CW" or "CW-R" appears.
![](/manual_guide/products/icom-ic7410-instruction-manual-6fdb052/10.png)