Icom IC-7410 Instruction Manual - Page 112

14 CONTROL COMMAND D Command table (continued) Cmd. Sub cmd. Data Description 1A 05 0074 00 Send/read Normal selection for paddle polarity 01 Send/read Reverse selection for paddle polarity 0075 00 Send/read Straight selection for keyer type 01 Send/read BUG-Key selection for keyer type 02 Send/read ELEC-Key selection for keyer type 0076 00 Send/read Mic. up/down keyer OFF 0077 01 Send/read Mic. up/down keyer ON 00 Send/read 1275 Hz selection for RTTY mark frequency 01 Send/read 1615 Hz selection for RTTY mark frequency 02 Send/read 2125 Hz selection for RTTY mark frequency 0078 00 Send/read 170 Hz selection for RTTY shift width 01 Send/read 200 Hz selection for RTTY shift width 02 Send/read 425 Hz selection for RTTY shift width 0079 00 Send/read Normal selection for RTTY keying polarity 01 Send/read Reverse selection for RTTY keying polarity 0080 00 Send/read RTTY decode USOS OFF 01 Send/read RTTY decode USOS ON 0081 00 Send/read "CR,LF,CR+LF" selection for RTTY decode new line code 01 Send/read "CR+LF" selection for RTTY decode new line code 0082 00 Send/read 2 lines selection for number of RTTY decoder line 01 Send/read 3 lines selection for number of RTTY decoder line 0083 00 Send/read Scan speed low 01 Send/read Scan speed high 0084 00 Send/read Scan resume OFF 01 Send/read Scan resume ON 0085 00 to 09 Send/read NB depth (00=1 to 09=10) 0086 0000 to Send/read NB width 0255 (0000=1 to 0255=100) 0087 0000 to Send/read VOX gain 0255 (0000=0% to 0255=100%) 0088 0000 to Send/read ANTI-VOX gain 0255 (0000=0% to 0255=100%) 0089 00 to 20 Send/read VOX delay time (00=0.0 sec. to 20=2.0 sec.) 0090 00 Send/read VOX voice delay OFF 01 Send/read Short selection for VOX voice delay 02 Send/read Mid selection for VOX voice delay 03 Send/read Long selection for VOX voice delay 06 see p. 108 Send/read DATA mode selection Cmd. Sub cmd. Data Description 1B 00 see p. 108 Send/read Repeater tone frequency 01 see p. 108 Send/read Tone squelch frequency 1C 00 00 Send/read Transceiver's status (RX) 01 Send/read Transceiver's status (TX) 01 00 Send/read Antenna tuner OFF (through) 01 Send/read Antenna tuner ON 02 Send/read Manual tuning selection 02 00 Send/read Transmit frequency monitor check OFF 01 Send/read Transmit frequency monitor check ON 1E 00 Read number of available TX frequency band 01 see p. 106 Read TX band edge frequencies 02 Read number of user-set TX frequency band 03 see p. 106 Send/read User-set TX band edge frequencies 105