Icom IC-7410 Instruction Manual - Page 114

14 CONTROL COMMAND D Data content description (continued) • Memory keyer contents Command : 1A 02 X X X X ...... X X w-&1: Text data q: Channel data 01ɿ
M1 03ɿ
M3 02ɿ
M2 04ɿ
M4 • Character's code Character ASCII code Description 0-9 30-39 Number A-Z 41-5A Alphabetical characters a-z 61-7A Alphabetical characters space 20 Word space / 2F Symbol ? 3F Symbol , 2C Symbol . 2E Symbol @ 40 Symbol ^ 5E e.g., to send BT, enter ^BT ✱ 2A Inserts contest number (can be used for 1 channel only) • CW message contents Command : 17 Up to 30 characters While transmitting in the CW mode, or if the Break-in function is ON, the transceiver transmits CW code when the PC sends Command 17. To send CW messages, the following character codes are used. • Character's code Character ASCII code Description 0-9 30-39 Number A-Z 41-5A Alphabetical characters a-z 61-7A Alphabetical characters space 20 Word space / 2F Symbol ? 3F Symbol . 2E Symbol - 2D Symbol , 2C Symbol : 3A Symbol ' 27 Symbol ( 28 Symbol ) 29 Symbol = 3D Symbol + 2B Symbol " 22 Symbol @ 40 Symbol • Split offset frequency setting Command : 1A 05 0012, 0013 q w e r X0XX0X XX 1 kHz digit: 0-9 100 Hz digit: 0 (fixed) 100 kHz digit: 0-9 10 kHz digit: 0-9 10 MHz digit: 0 (fixed) 1 MHz digit: 0-9 Direction: 00: + direction 01: - direction • SSB transmission bandwidth setting Command : 1A 05 0050, 0051, 0052 XX Lower edge Higher edge Lower edge 0: 100Hz 1: 200Hz 2: 300Hz 3: 500Hz Higher edge 0: 2500Hz 1: 2700Hz 2: 2800Hz 3: 2900Hz • RX HPF and LPF settings in each operating mode Command : 1A 05 0045, 0053, 0058, 0063, 0064 XX XX LPF (upper side) HPF (lower side) HPF 0: through 1 to 20: 100 to 2000 Hz LPF 5 to 24: 500 to 2400 Hz 25: through Set the LPF value larger than HPF one. • "FF" stops sending CW messages. • "^" is used to transmit a string of characters with no inter-character space. 107