Icom IC-7410 Instruction Manual - Page 67
Noise Blanker, Meter Peak Hold function
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
■ Noise Blanker (Mode: SSB/CW/RTTY/AM) The Noise Blanker eliminates pulse-type noise such as noise from car ignitions. q Push [NB] to turn ON the Noise Blanker function. • "NB" appears. w R otate the [NB] control to adjust the Noise Blanker threshold level. e P ush [NB] again to turn OFF the function. • "NB" disappears. When using the Noise Blanker function, received signals may be distorted if they are excessively strong or when used for noise other than pulses. In this case, set the Noise Blanker threshold level to a shallow position, or turn OFF the function. D NB Set mode To deal with various types of noise, the attenuation level and noise blanking duration can be set in the NB Set mode. q H old down [NB] for 1 second to display the "NB" screen (Noise Blanker). w P ush [Y](F-1) or [Z](F-2) to select the desired item. e R otate [DIAL] to select the desired option. • Hold down [F-3] for 1 second to reset to the default setting, if desired. r P ush [NB] to save and return to the previous screen. 1. NB Depth (Default: 8) Set the noise attenuation level to between 1 and 10. 2. NB Width (Default: 50) Set the blanking duration to between 1 and 100. ■ Meter Peak Hold function When the "Meter Peak Hold" item is set to ON in the Set mode, the peak level of a received signal strength or the output power is displayed for approximately 0.5 seconds. (p. 86). 5 FUNCTIONS FOR RECEIVE [NB] control [NB] M1 AGC TBW SCP Appears NB NB Depth ∫1 √ 8 Select the item Reset to the default setting Appears for 0.5 seconds. SET M e t e r P e a k H o l d Ù 10 Ú ON 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 60