Icom IC-7410 Instruction Manual - Page 49
Keyer Set mode, Side Tone Level, Side Tone L-Limit, Repeat Time, Message Display, Dot/Dash Ratio, - weight
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4 RECEIVE AND TRANSMIT D Keyer Set mode This Set mode is used to set the CW sidetone, memory keyer repeat time, dash weight, paddle specifications, keyer type, etc. • Setting contents q In the CW mode, push [MENU] to display the "M1" screen (Menu 1). w P ush [KEY](F-4) to display the "KEY" screen (Mem- ory Keyer). e P ush [SET](F-5) to enter the Keyer Set mode. r P ush [Y](F-1) or [Z](F-2) to select the desired item. t R otate [DIAL] to select the desired option. • Hold down [F-3] for 1 second to reset to the default setting, if desired. y P ush [MENU] to save, and return to the "KEY" screen. u P ush [MENU] again to return to the "M1" screen. 1. Side Tone Level (Default: 50%) Select the CW sidetone output level. • 0 to 100% in 1% steps can be selected. 2. Side Tone L-Limit (Default: ON) Set the CW sidetone level limit. When the [AF] control is rotated above a specified level, the CW sidetone does not increase. • ON : CW sidetone level is limited. • OFF : CW sidetone level is not limited. 3. Keyer Repeat Time (Default: 2s) When sending CW using the repeat timer, this item sets the time between transmission. • 1 to 60 seconds in 1 second steps can be selected. 4. Message Display (Default: Normal) When you are in the "SEND" screen (Keyer Send), channel numbers are displayed above the function keys. However, you can display the first three characters of the keyer memory instead of the channel number. Select whether to display the channel number or the first three characters of the keyer. • Normal : Displays the channel number. • Message : D isplays the first three characters of the keyer memory. SET Side Tone Level ∫1 √ 50% Select the item Reset to the default setting 5. Dot/Dash Ratio Set the dot/dash ratio. (Default: 1:1:3.0) • 1:1:2.8 to 1:1:4.5 (in 0.1 steps) can be selected. Keying weight example: Morse code "K" Weight setting: DOT (fixed*) DASH DASH 1:1:3 (default) Weight setting: Adjusted Adjustable range SPACE (fixed*) *SPACE and DOT length can be adjusted with only [KEY SPEED]. 6. Rise Time (Default: 4ms) This item sets the rise time of the transmitted CW envelope. • 2, 4, 6 or 8 milliseconds can be selected. About rise time Key action Tx Rx Tx output power Set Tx power level 0 Rise time Time If the rise time of a CW waveform is too short, key clicks on nearby frequencies can be generated. ☞ Continued on the next page. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 42