Icom IC-7410 Instruction Manual - Page 33
Frequency setting
![]() |
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3 BASIC OPERATION ■ Frequency setting You can select the transceiver's frequency by using [DIAL], or you can enter it using the keypad. D Tuning with [DIAL] q S elect the desired frequency band. • Push a band key 1-3 times. Three different frequencies on each frequency band can be selected with the band key. (See the previous page "Using the band stacking registers.") • The default tuning step differs, depending on the oper- ating mode. SSB/CW/RTTY: 10 Hz AM : 1 kHz ("Z" is displayed) FM : 10 kHz ("Z" is displayed) w R otate [DIAL] to set the desired frequency. If the Dial Lock function is ON, " " is displayed, and [DIAL] does not function. In this case, push [LOCK] to turn OFF the Dial Lock function. (p. 61) D Direct frequency entry with the keypad The transceiver has a keypad for direct frequency entry, as described below. q P ush [F-INP ENT] to enter frequencies with the keypad. • All frequency digits disappear. w P ush the numeric keys to input the desired frequency. • Push [GENE •] to input a "." (decimal point) between the MHz digits and kHz digits. e P ush [F-INP ENT] to set the input frequency. • To cancel the input, push any key such as [MW] or [M-CLR], before pushing [F-INP ENT]. [EXAMPLE] 14.025 MHz 18.0725 MHz 706 kHz 5.100 MHz 7.000 MHz 21.280 MHz ➪ 21.245 MHz Band keys [DIAL] Keypad 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 26
![](/manual_guide/products/icom-ic7410-instruction-manual-6fdb052/33.png)