Icom IC-7410 Instruction Manual - Page 30
Basic Operation - review
![]() |
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3 BASIC OPERATION ■ Before first applying power Before turning ON your transceiver for the first time, make sure all connections required for your system are complete by reviewing them in Section 2 of this manual. [NR] : Max. CCW After all connections have been made, set controls and switches as shown in the illustration below. [RF PWR] : Max. CW [MIC] : 12 o'clock [AF] : Max. CCW [RF/SQL] : 12 o'clock [KEY SPEED] : 10-12 o'clock [NOTCH] : 12 o'clock [CW PITCH] : 12 o'clock CW : Clockwise CCW : Counterclockwise ■ Turning ON (CPU resetting) First time to Power ON: Reset the transceiver using the following procedure. Resetting CLEARS all the programmed contents in the memory channels, and returns all the programmed items in the Set mode to their default settings. q Make sure the transceiver's power is OFF. w W hile holding down both [F-INP ENT] and [M-CLR], push [POWER] to turn ON the transceiver. • The CPU is reset. • The transceiver displays "ALL CLEAR," then displayes its initial VFO frequency when resetting is complete. e C hange the Set mode settings to suit your operat- ing needs. (p. 85) Normal Power ON: Push [POWER] to turn ON the transceiver. Power OFF: Hold down [POWER] for 1 second to turn OFF the transceiver. [POWER] [M-CLR] [F-INP ENT] Ω ALL CLEAR ≈ M1 AGC TBW SCP 23
![](/manual_guide/products/icom-ic7410-instruction-manual-6fdb052/30.png)