Icom IC-7410 Instruction Manual - Page 68
Noise Reduction, Notch function, Dial Lock function
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
5 FUNCTIONS FOR RECEIVE ■ Noise Reduction The Noise Reduction function reduces random noise components and enhances audio signals which are buried in noise. The received signals are converted to digital signals and then the audio signals are separated from the noise. q Push [NR] to turn ON the Noise Reduction function. • "NR" appears. w R otate the [NR] control to adjust the noise reduction level. e P ush [NR] again to turn OFF the function. • "NR" disappears. A large rotation of the [NR] control results in audio signal masking or distortion. Set the [NR] control for maximum readability. [NR] [NR] control Noise reduction OFF Noise components Noise reduction ON Desired signal (CW) ■ Dial Lock function The Dial Lock function prevents frequency changes by accidental movement of [DIAL] by electronically locking it. ➥ Push [LOCK] to turn the Dial Lock function ON or OFF. • " " appears when the Dial Lock function is ON. ■ Notch function (Mode = Auto notch : SSB/AM/FM Manual notch : SSB/CW/RTTY/AM) This transceiver has Auto and Manual Notch functions. The Auto Notch function uses DSP to automatically attenuate beat tones, tuning signals, etc., even if their frequencies are changing. The Manual Notch function allows you to manually attenuate a frequency via the [NOTCH] control. ➥ In the SSB or AM mode, push [NOTCH] to toggle the Notch function between auto, manual and OFF. • Either the Auto or Manual Notch function can be disabled in the Set mode. (p. 88) ➥ In the CW or RTTY mode, push [NOTCH] to turn the Manual Notch function ON or OFF. ➥ In the FM mode, push [NOTCH] to turn the Auto Notch function ON or OFF. • "MNF" appears when the Manual Notch function is ON. • "ANF" appears when the Auto Notch function is ON. • No indicator appears when the notch filter is OFF. • When the Manual Notch function is ON, hold down [NOTCH] for 1 second to select the wide, mid, or narrow manual notch filter width. 61 [LOCK] [NOTCH] control [NOTCH] While tuning the manual notch filter, noise may be heard. This comes from the DSP unit and does not indicate an equipment malfunction.