Icom IC-7410 Instruction Manual - Page 109
Command table - mic equalizer
![]() |
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
CONTROL COMMAND 14 D Command table Cmd. Sub cmd. Data Description 00 see p. 106 Send operating frequency for transceive 01 see p. 106 Send operating mode for transceive 02 see p. 106 Read band edge frequencies 03 see p. 106 Read operating frequency 04 see p. 106 Read operating mode 05 see p. 106 Send operating frequency 06 see p. 106 Send operating mode 07 00 Select VFO mode Select VFO A 01 Select VFO B A0 Equalize VFO A and VFO B B0 Exchange VFO A and VFO B 08 Select Memory mode 0001 to Select memory channel 0101 (0001=M-CH01 to 0099=M-CH99, 0100=P1, 0101=P2) 09 Memory write 0A Memory copy to VFO 0B 0E 00 Memory clear Scan stop 01 Programmed/memory scan start 02 Programmed scan start 03 ∂F scan start 12 Fine programmed scan start 13 Fine ∂F scan start 22 Memory scan start 23 Select memory scan start A1 Set ∂F scan span ±5 kHz A2 Set ∂F scan span ±10 kHz A3 Set ∂F scan span ±20 kHz A4 Set ∂F scan span ±50 kHz A5 Set ∂F scan span ±100 kHz A6 Set ∂F scan span ±500 kHz A7 Set ∂F scan span ±1 MHz B0 Set as non-select channel B1 Set as select channel D0 Set scan resume OFF D3 Set scan resume ON 0F Read Split function (00=OFF, 01=ON) 00 Set the Split function OFF 01 Set the Split function ON 10 00 Send/read the tuning step 10 Hz (1 Hz) 01 Send/read the tuning step 100 Hz 02 Send/read the tuning step 1 kHz 03 Send/read the tuning step 5 kHz 04 Send/read the tuning step 9 kHz 05 Send/read the tuning step 10 kHz 06 Send/read the tuning step 12.5 kHz 07 Send/read the tuning step 20 kHz 08 Send/read the tuning step 25 kHz 11 00 Send/read attenuator OFF 20 Send/read 20 dB attenuator 12 00 Send/read ANT1 selection 13 00 01 Send/read ANT2 selection Announce operating frequency, operating mode and S-meter level with voice synthesizer 01 Announce operating frequency and S-meter level with voice synthesizer 02 Announce operating mode with voice syn- thesizer Cmd. Sub cmd. 14 01 02 03 06 07 08 09 0A 0B 0C 0D 0E 0F 12 15 16 17 18 19 15 01 02 11 12 13 14 16 02 12 22 40 41 Data 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 00 01 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 0000 to 0255 00 01 02 01 02 03 00 01 00 01 00 01 Description Send/read [AF] position (0000=max. CCW, 0255=max. CW) Send/read [RF] position (0000=max. CCW, 0255=11 o'clock) Send/read [SQL] position (0000=11 o'clock, 0255=max. CW) Send/read [NR] position (0000=max. CCW, 0255=max. CW) Send/read inner [TWIN PBT] position (0000=max. CCW, 0128=center, 0255=max. CW) Send/read outer [TWIN PBT] position (0000=max. CCW, 0128=center, 0255=max. CW) Send/read [CW PITCH] position (0000=max. CCW (300 Hz), 0128=center (600 Hz), 0255=max. CW (900 Hz)) Send/read [RF PWR] position (0000=max. CCW to 0255=max. CW) Send/read [MIC] position (0000=max. CCW to 0255=max. CW) Send/read [KEY SPEED] position (0000=max. CCW to 0255=max. CW) Send/read [NOTCH] position (0000=max. CCW, 0128=center, 0255=max. CW) Send/read [COMP] position (0000=max. CCW to 0255=max. CW) Send/read [BK-IN DELAY] position (0000=max. CCW to 0255=max. CW) Send/read [NB] position (0000=max. CCW to 0255=max. CW) Send/read [MONI GAIN] position (0000=max. CCW to 0255=max. CW) Send/read VOX gain (0000=0% to 0255=100%) Send/read Anti VOX gain (0000=0% to 0255=100%) Send/read CONTRAST level (0000=0% to 0255=100%) Send/read BRIGHT level (0000=0% to 0255=100%) Read squelch state (squelch close) Read squelch state (squelch open) Read S-meter level (0000=S0, 0120=S9, 0240=S9+60 dB) Read RF power meter (0000=0%, 0141=50%, 0215=100%) Read SWR meter (0000=SWR1.0, 0041=SWR1.5, 0081=SWR2.0, 0120=SWR3.0) Read ALC meter (0000=Min., 0120=Max.) Read COMP meter (0000=0 dB, 0120=15 dB, 0240=30 dB) Send/read Preamp OFF Send/read Preamp 1 ON Send/read Preamp 2 ON Send/read AGC FAST Send/read AGC MID Send/read AGC SLOW Send/read Noise Blanker OFF Send/read Noise Blanker ON Send/read Noise Reduction OFF Send/read Noise Reduction ON Send/read Auto Notch function OFF Send/read Auto Notch function ON 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 102
![](/manual_guide/products/icom-ic7410-instruction-manual-6fdb052/109.png)