Icom IC-7410 Instruction Manual - Page 79

7 MEMORY OPERATION ■ Memory contents copying The Memory channel contents (frequency, operating mode, etc.) can be copied to the VFO. The copy can be performed in either the VFO mode or the Memory mode. D Copying in the VFO mode This is useful for copying programmed contents to a displayed VFO. q Push [VFO/MEMO] to select the VFO mode. w P ush [Y] or [Z] to select a Memory channel num- ber to be copied. • " " appears if the selected Memory channel is a blank channel. In this case, nothing can be copied. e H old down [VFO/MEMO] for 1 second to copy the Memory channel contents into the VFO. • Three beeps sound when the copy is complete. VFO/MEMO] While in the VFO mode M1 AGC Hold down TBW SCP D Copying in the Memory mode This is useful for copying the Memory channel contents while operating in the Memory mode. When you have changed the displayed frequency, operating mode, etc. in the selected Memory channel: • Displayed data is copied. • Programmed contents in the Memory channel are not copied, but remain in only the Memory channel. q Push [VFO/MEMO] to select the Memory mode. w P ush [Y] or [Z] to select a Memory channel to be copied. • " " appears if the selected Memory channel is a blank channel. In this case, select another channel. • Set the frequency or operating mode if required. e H old down [VFO/MEMO] for 1 second to copy the Memory channel contents into the VFO. • Three beeps sound when the copy is complete. r P ush [VFO/MEMO] to select the VFO mode. The Memory channel contents are copied M1 AGC TBW SCP While in the Memory mode M1 AGC Hold down TBW SCP M1 AGC Push TBW SCP The Memory channel contents are copied M1 AGC TBW SCP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 72