Icom IC-7410 Instruction Manual - Page 81

7 MEMORY OPERATION ■ Memo Pad function The transceiver has a Memo Pad function to store the displayed data for easy writing and recalling. The memo pads are separate from the Memory channels. The default number of memo pads is 5. However, you can increase the number to 10 in the "Memopad Numbers" item of the Set mode, if desired. (p. 87) Memo pads are convenient when you want to memorize the displayed data temporarily, such as when you find a DX station in a pile-up, or when a desired station is busy for a long time and you want to temporarily search for other stations. Use the transceiver's memo pads instead of relying on hastily scribbled notes that are easily misplaced. D Writing the displayed data into a memo pad You can store the displayed data by pushing [MP-W]. When you store the 6th data into memo pads, the oldest stored entry is automatically erased, to make room for the new data. NOTE: Each memo pad must have its own unique set of data; memo pads having identical data cannot be written. Memo pads Newest M1 AGC TBW SCP In this example, 21.347 MHz (USB) will be erased when 21.280 MHz (LSB) is written. Erased Oldest D Calling up a memo pad You can call up a memo pad by pushing [MP-R] while in either the VFO or Memory mode. • The memo pad data is called up, starting from the most recently written. When you call up a memo pad, the previously displayed data is automatically stored in a temporary pad. The temporary pad can be recalled by pushing [MP-R]. • You may think there are 6 memo pads because 6 different frequencies (5 in memo pads and 1 in the temporary pad) are called up by [MP-R]. If you change the data called up from a memo pad, the stored temporary pad data is replaced with the changed data. Memo pads Newest M1 AGC TBW SCP Oldest 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 74