Icom IC-7410 Instruction Manual - Page 60
Functions For Receive
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
5 FUNCTIONS FOR RECEIVE ■ RIT function The RIT (Receive Increment Tuning) function compensates for off-frequency operation of the received station. The function shifts the receive frequency up to ±9.99 kHz in 10 Hz steps*, without changing the transmit frequency. *The [RIT/∂TX] control tunes in 1 Hz steps when the operating frequency readout is set to the 1 Hz step readout. q Push [RIT] to turn ON the RIT function. • "RIT" and the frequency shift appear when this function is ON. w Rotate the [RIT/∂TX] control. • Hold down [CLEAR] for 1 second to reset the RIT frequency. • Push [CLEAR] momentarily to reset the RIT frequency when the "Quick RIT Clear" item is set to "ON" in the Set mode. (p. 88) • H old down [RIT] for 1 second to add the frequency shift to the operating frequency, if desired. e To cancel the RIT function, push [RIT] again. • "RIT" and the frequency shift disappear. D RIT Monitor function When the RIT function is ON, holding down [XFC] allows you to listen to the displayed frequency (RIT is temporarily cancelled). M1 AGC [RIT] [CLEAR] Appear [RIT/∂TX] TBW SCP [XFC] 53