Icom IC-7410 Instruction Manual - Page 59
Repeater access tone frequency setting, Transmit frequency monitor check
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
4 RECEIVE AND TRANSMIT D Repeater access tone frequency setting Some repeaters require a subaudible tone to be accessed. Subaudible tones are superimposed on your normal signal and must be set first. You can select 50 tones from 67.0 Hz to 254.1 Hz. q In the FM mode, push [MENU] to display the "M1" screen (Menu 1). w P ush [TON](F-4) one or more times to turn ON the Tone Encoder function. • "TONE" appears. e H old down [TON](F-4) for 1 second to display the "TON" screen (Tone). • "Rptr Tone" appears on the function display. r R otate [DIAL] to select the desired repeater tone frequency. (See the table below.) t P ush [MENU] to save, and exit the "TON" screen. • Available tone frequencies (unit: Hz) 67.0 85.4 107.2 136.5 165.5 186.2 210.7 254.1 69.3 088.5 110.9 141.3 167.9 189.9 218.1 71.9 091.5 114.8 146.2 171.3 192.8 225.7 74.4 094.8 118.8 151.4 173.8 196.6 229.1 77.0 097.4 123.0 156.7 177.3 199.5 233.6 79.7 100.0 127.3 159.8 179.9 203.5 241.8 82.5 103.5 131.8 162.2 183.5 206.5 250.3 D Transmit frequency monitor check You may be able to directly receive the other party's transmitted signal without having to go through a repeater. This function helps you to check whether or not the direct communication can be done. ➥ While receiving, hold down [XFC] to see if you can directly receive the other party's transmitted signal. • While holding down [XFC], the offset direction and frequency offset are displayed on the function display. [TON] [MENU] [F-3] [DIAL] TON R p t r T o n e TON SCAN 88.5Hz [XFC] M1 AGC -100.0k TON SCP Offset direction and frequency 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 52