Icom IC-7410 Instruction Manual - Page 94

Tuner PTT Start, Tuner Preset Clear, ANT] Switch, SPEECH Level, SPEECH Language, SPEECH Speed,

Get Icom IC-7410 PDF manuals and user guides View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

10 SET MODE ■ Set mode description (Continued) 17. Tuner (PTT Start) (Default: OFF) Whenever you push [PTT], the internal or external antenna tuner automatically starts tuning if the operating frequency is changed by more than 1% from the lasttuned frequency. • OFF : Tuning starts only when [TUNER] is pushed. • ON : (Internal antenna tuner) Tuning starts when you push [PTT] on a new frequency, if the internal antenna tuner is ON. (External antenna tuner) Tuning always starts when you push [PTT] on a new frequency, regardless of whether the external antenna tuner is ON or OFF. 18. Tuner Preset Clear Select the desired antenna. The selected antenna's preset memory* is cleared by holding down [CLR](F-4) for 1 second. *The variable capacitor settings are memorized as a preset point for each frequency range (100 kHz steps) after the tuner matches an antenna. • CLR ANT1 : T he preset memory of [ANT1]'s antenna is cleared. • CLR ANT2 : T he preset memory of [ANT2]'s antenna is cleared. 19. [ANT] Switch (Default: Auto) Set the antenna switch function to Auto, Manual or OFF. When you change the operating frequency, this function will automatically select the correct antenna, or you must do it manually. • OFF : [ANT•METER] does not function. The [ANT1] connector is always selected. • Manual : Y ou must manually change the antenna by pushing [ANT•METER]. • Auto : T he antenna memorized by the band memory is automatically selected. You can also manually change the antenna by pushing [ANT•METER]. 20. SPEECH Level (Default: 50%) Adjust the speech audio output level to between 0% (no output) and 100% (maximum output). 21. SPEECH Language (Default: English) Select English or Japanese as the speech language. 22. SPEECH Speed (Default: HIGH) Select HIGH (faster) or LOW (slower) speech speed. 23. SPEECH S-Level (Default: ON) The signal level announcement with the voice synthesizer can be turned ON or OFF. • OFF : The signal level is not announced. Operating frequency is announced. • ON : The signal level and the operating frequency are announced. 24. SPEECH [MODE] SW (Default: OFF) Turn the Operating Mode Speech function ON or OFF. When this function is ON, the selected operating mode is verbally announced when a mode switch is pushed. • OFF : The operating mode Speech function is OFF. • ON : The operating mode Speech function is ON. 25. Memopad Numbers (Default: 5) Set the number of available memo pads to 5 or 10. See page 74 for details. 26. MAIN DIAL Auto TS (Default: HIGH) Set the Auto Tuning Step function for [DIAL]. When rapidly rotating [DIAL], the tuning step automatically changes as selected. There are two types of auto tuning steps: LOW (Faster) and HIGH (Fastest). • OFF : Auto tuning step is turned OFF. • LOW : Approximately 2 times faster. • HIGH : Approximately 5 times faster when the tuning step is set to 1 kHz or smaller steps; approximately 2 times faster when the tuning step is set to 5 kHz or larger steps. 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
87
SET MODE
10
Tuner (PTT Start)
17.
(Default: OFF)
Whenever you push [PTT], the internal or external an-
tenna tuner automatically starts tuning if the operating
frequency is changed by more than 1% from the last-
tuned frequency.
• OFF : Tuning starts only when [TUNER] is pushed.
• ON
: (Internal antenna tuner) Tuning starts when
you push [PTT] on a new frequency, if the in-
ternal antenna tuner is ON.
(External antenna tuner) Tuning always starts
when you push [PTT] on a new frequency, re-
gardless of whether the external antenna tuner
is ON or OFF.
Tuner Preset Clear
18.
Select the desired antenna.
The selected antenna’s preset memory* is cleared by
holding down [CLR](F-4) for 1 second.
*The variable capacitor settings are memorized as a
preset point for each frequency range (100 kHz steps)
after the tuner matches an antenna.
• CLR ANT1 : The preset memory of [ANT1]’s antenna
is cleared.
• CLR ANT2 : The preset memory of [ANT2]’s antenna
is cleared.
[ANT] Switch
19.
(Default: Auto)
Set the antenna switch function to Auto, Manual or OFF.
When you change the operating frequency, this func-
tion will automatically select the correct antenna, or you
must do it manually.
• OFF
: [ANT•METER] does not function. The
[ANT1] connector is always selected.
• Manual : You must manually change the antenna by
pushing [ANT•METER].
• Auto
: The antenna memorized by the band mem
-
ory is automatically selected. You can also
manually change the antenna by pushing
[ANT•METER].
SPEECH Level
20.
(Default: 50%)
Adjust the speech audio output level to between 0%
(no output) and 100% (maximum output).
SPEECH Language
21.
(Default: English)
Select English or Japanese as the speech language.
SPEECH Speed
22.
(Default: HIGH)
Select HIGH (faster) or LOW (slower) speech speed.
SPEECH S-Level
23.
(Default: ON)
The signal level announcement with the voice synthe-
sizer can be turned ON or OFF.
• OFF : The signal level is not announced. Operating
frequency is announced.
• ON
: The signal level and the operating frequency
are announced.
SPEECH [MODE] SW
24.
(Default: OFF)
Turn the Operating Mode Speech function ON or
OFF.
When this function is ON, the selected operating mode
is verbally announced when a mode switch is pushed.
• OFF : The operating mode Speech function is OFF.
• ON
: The operating mode Speech function is ON.
Memopad Numbers
25.
(Default: 5)
Set the number of available memo pads to 5 or 10.
See page 74 for details.
MAIN DIAL Auto TS
26.
(Default: HIGH)
Set the Auto Tuning Step function for [DIAL]. When
rapidly rotating [DIAL], the tuning step automatically
changes as selected.
There are two types of auto tuning steps: LOW (Faster)
and HIGH (Fastest).
• OFF
: Auto tuning step is turned OFF.
• LOW : Approximately 2 times faster.
• HIGH : Approximately 5 times faster when the tuning
step is set to 1 kHz or smaller steps; approxi-
mately 2 times faster when the tuning step is
set to 5 kHz or larger steps.
■
Set mode description (Continued)