Icom IC-7410 Instruction Manual - Page 51
Operating RTTY FSK
View all Icom IC-7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4 RECEIVE AND TRANSMIT ■ Operating RTTY (FSK) When using your RTTY terminal or TNC, consult the manual that comes with the equipment. q Select the desired band. (p. 25) w P ush [RTTY] to select the RTTY mode. • Pushing [RTTY] alternately selects the RTTY or RTTY reverse mode. e R otate [DIAL] to tune a desired signal. • The S-meter indicates received signal strength. • If the received signal cannot be demodulated, try to select the RTTY reverse mode in step w. • The tuning step can be changed in the tuning step program mode. (p. 27) r P ush [TRANSMIT] to set the transceiver to the transmit mode, or transmit a SEND signal from your TNC. • The TX indicator lights red. • The Po meter displays the transmitted RTTY signal strength. t U se your PC or TNC (TU) to transmit RTTY (FSK) signals. y Push [TRANSMIT] to return to receive. Convenient Receive functions • Preamp and attenuator (p. 55) • Twin PBT (Passband Tuning) (p. 59) • AGC (Auto Gain Control) (p. 56) • Noise Blanker (p. 60) • Noise Reduction (p. 61) • Notch filter (p. 61) • ¼ function (p. 27) • Twin Peak Filter (p. 47) [TRANSMIT] TX indicator [RTTY] [DIAL] "RTTY" or "RTTY-R" appears M1 AGC TBW SCP While receiving, the meter functions as the RTTY tuning meter to make correct tuning easier. Rotate [DIAL] to the point where both sides of the dots appear equally. * While transmitting, the meter functions as the trans- mit meter, selected by pushing [ANT•METER]. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 44