Icom IC-M510 Instruction Manual - Page 106
Power Link function, NMEA over WLAN settings, Function, Destination IP
![]() |
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
11 WLAN SeTTING DDPower Link function You can set whether the CT-M500 is automatically turned ON or OFF when the transceiver is turned ON or OFF. [MENU] > Settings > WLAN > Advanced Settings > CT-M500 > Power Link DDNMEA over WLAN settings You can output the NMEA 0183 (ver. 2.0 or later) sentence through the Wireless LAN (WLAN). [MENU] > Settings > WLAN > Advanced Settings > NMEA over WLAN Function Select whether or not to output the NMEA 0183 sentence to the devices in your WLAN. Destination IP Enter the destination IP address. Destination Port Enter the destination port number. (Range: 49152 to 65535) 93
![](/manual_guide/products/icom-icm510-instruction-manual-f14c817/106.png)
93
11
WLAN SETTING
D
Power Link function
You can set whether the CT-M500 is automatically turned
ON or OFF when the transceiver is turned ON or OFF.
[MENU] > Settings > WLAN > Advanced Settings >
CT-M500 >
Power Link
D
NMEA over WLAN settings
You can output the NMEA 0183 (ver. 2.0 or later) sentence
through the Wireless LAN (WLAN).
[MENU] > Settings > WLAN > Advanced Settings >
NMEA over WLAN
Function
Select whether or not to output the NMEA 0183 sentence
to the devices in your WLAN.
Destination IP
Enter the destination IP address.
Destination Port
Enter the destination port number.
(Range: 49152 to 65535)