Icom IC-M510 Instruction Manual - Page 35
Regular call, Alarm OFF
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
7 DIGITAL SELECTIVE CALLING (DSC) D Regular call Select the nature of the Distress call to include in the Regular Distress call. 1. Push DTRS . 1 • The "Compose Distress" screen is displayed. 2. Push [ENT] or [CH/ENT] to enter the Nature selection 2 mode. 3. Select the nature of the Distress, and then push [ENT] 3 or [CH/ENT]. (Example: Flooding) • The setting is saved and returns to the previous screen. 4 L If no valid GPS data is being received, select "Position," and then enter the latitude, longitude, and 5 UTC. See "Entering the position and time" on page 20 for 6 details. 7 4. While lifting up the key cover, hold down [DISTRESS] 8 (the red button) for 3 seconds until you hear 3 short countdown beeps and a long beep sound. 9 • The backlight blinks. 10 11 12 13 14 5. After sending, wait for an Acknowledgment. • "Waiting for ACK" is displayed. 15 L The Distress call is automatically sent every 3.5 to 4.5 minutes, until an Acknowledgment is 16 received, or a Distress Cancel call is sent. (p. 23) 17 18 6. When you receive an Acknowledgment, an alarm sounds. Push Alarm OFF to turn OFF the alarm. • Channel 16 is automatically selected. 7. Hold down [PTT] to communicate. 8. After you have finished your conversation, push STBY . • "Terminate the procedure. Are you sure?" is displayed. 9. Push OK to return to the operating screen. TIP: You can also send a Regular call by selecting the "Distress" item on the Menu screen. 22