Icom IC-M510 Instruction Manual - Page 26
Setting the Call channel, Receiving and transmitting, Call Channel, CAUTION: DO
![]() |
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4 BASIC OPERATIONS ■ Setting the Call channel By default, a Call channel is set in each Channel Group. You can set your most often-used channel as your Call channel in each Channel Group for quick recall. 1. Open the "Call Channel" screen. [MENU] > Settings > Radio > Call Channel 2. Push [▲] or [▼], or rotate [CH/ENT] to select the channel. 3. Push [ENT] or [CH/ENT] to set the selected channel as the Call channel. 4. Push [MENU] to exit the Menu screen. ■ Receiving and transmitting CAUTION: DO NOT transmit without an antenna. 1. Push [▲] or [▼], or rotate [CH/ENT] to select a channel to call on. • The channel number and name are briefly displayed. L is displayed while receiving a signal. 2. Hold down [PTT] and speak into the microphone at your normal voice level. • is displayed while transmitting. 3. Release [PTT] to receive. Hold down to transmit. Release to receive. Speak to the Microphone. Select a channel PW R TIP: To maximize the readability of your transmitted signal, pause for a second after holding down [PTT] and hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, and then speak at your normal voice level. NOTE: The Time-out Timer function cuts OFF transmission after 5 minutes of continuously transmitting, to prevent prolonged transmission. 13
![](/manual_guide/products/icom-icm510-instruction-manual-f14c817/26.png)