Icom IC-M510 Instruction Manual - Page 23
BASIC OPERATIONS, Selecting a channel
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4 BASIC OPERATIONS ■ Selecting a channel D Regular Channel 1 You can select a channel by pushing [▲] or [▼]. 2 D Channel 16 Channel 16 is the distress and safety channel. It is used to establish the initial contact 3 with a station, and for emergency communications. Channel 16 is monitored during both Dualwatch and Tri-watch. While in the standby mode, you must monitor Channel 16. 4 Push [16/C] to select Channel 16. 5 L To return to the previously selected channel, push [◄] or [►] to display CH/WX or CH , and then push the software 6 key below CH/WX or CH . 7 8 9 D Call channel Each Channel Group has separate leisure-use Call 10 channels. The Call channel is scanned during Tri-watch. The Call channels can be selected and used to store your 11 most often used channels in each Channel Group, for quick recall. See page 13 for details on setting the Call 12 channel. Hold down [16/C] for 1 second to select the Call channel. 13 • The Call channel number and "CALL" are displayed. L To return to the previously selected channel, push [◄] or [►] to display CH/WX or CH , 14 and then push the software key below CH/WX or CH . 15 D Selecting a Channel Group Channel Groups are preset into your transceiver. You can select a Channel Group for 16 USA, International, Canadian, DSC, and ATIS depending on the transceiver version. 17 1. Open the "Channel Group" screen. 18 [MENU] > Settings > Radio > Channel Group 2. Push [▲] or [▼], or rotate [CH/ENT] to select a Channel Group, and then push [ENT], or [CH/ENT]. 3. Push [MENU] to exit the Menu screen. 4. The selected Channel Group's icon is displayed on the operating screen. Version USA UK European NLD FRG USA Preset Channel Group INT CAN DSC ATIS 10