Icom IC-M510 Instruction Manual - Page 112
Mounting the transceiver, Using the supplied mounting bracket
![]() |
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
12 CONNECTIONS AND MAINTENANCE ■■ Mounting the transceiver DDUsing the supplied mounting bracket You can mount the transceiver on a dashboard using the universal mounting bracket supplied with your transceiver. CAUTION: KEEP the transceiver and microphone at least 1 meter (3.3 ft) away from the vessel's magnetic navigation compass. NOTE: The built-in GPS antenna is located, as shown on the right. Be sure that the transceiver is positioned where the transceiver has a clear view to receive signal from satellites. 1. Mount the bracket securely to a surface which is more than 10 mm thick and can support more than 5 kg using the 4 supplied screws (5 × 20 mm). NOTE: When mounting the transceiver on a board, fix the bracket to the board using the user supplied bolts and nuts, as shown below. 2. Attach the transceiver to the bracket so that the face of the transceiver is at 90° to your line of sight when operating it. LL Adjust the function display angle to be easy-to-read. Mounting Example Mounting screws Spring washers Flat washers 99
![](/manual_guide/products/icom-icm510-instruction-manual-f14c817/112.png)