Icom IC-M510 Instruction Manual - Page 74
ID Blocking, Entering an ID
![]() |
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
8 AIS FUNCTION ■ AIS settings ID Blocking The transceiver blocks AIS transponders that are entered into the ID Blocking list. Enter your vessel's transponder ID or other vessel's transponder IDs if necessary to prevent the transceiver from detecting them as dangerous targets. L You can enter up to 10 MMSI codes. • Entering an ID 1. Open the "ID blocking" screen. [MENU] > Settings > AIS > ID Blocking • The blocked AIS transponder's ID is displayed. • "No ID" is displayed if there is no blocked AIS transponder. 2. Push Add to start the ID entry. 3. Enter an ID. TIP: • Select a number using [◄] and [►]. • Push [ENT] or [CH/ENT] to enter the selected number. • Select "←" or "→," or rotate [CH/ ENT] to move the cursor. 4. Select " Finish ," and then push [ENT] to enter the ID. • Editing an ID 1. Open the "ID Blocking" screen. [MENU] > Settings > AIS > ID Blocking 2. Push [▲] or [▼] to select an ID. 3. Push Edit . • See step 3 in "Entering an ID," as described above. 4. Push OK . • Deleting an ID 1. Open the "ID Blocking" screen. [MENU] > Settings > AIS > ID Blocking 2. Push [▲] or [▼] to select an ID. 3. Push Delete . • "Delete the ID. Are you sure?" is displayed. 4. Push OK . 61
![](/manual_guide/products/icom-icm510-instruction-manual-f14c817/74.png)