Icom IC-M510 Instruction Manual - Page 118

13 SPECIFICATIONS AND OPTIONS ■■ Specifications IC-M510E DDGeneral ••Frequency coverage: •• Mode: ••Operating temperature range: ••Current drain (at 13.8 V): ••Power supply requirement: ••Antenna impedance: ••Dimensions (approximate, projections not included): ••Weight (approximate): TX 156.025 ~ 161.425 MHz (Depending on the version) RX 156.050 ~ 162.000 MHz (Depending on the version) DSC (CH 70) 156.525 MHz AIS (CH A)* 161.975 MHz AIS (CH B)* 162.025 MHz 16K0G3E (FM), 16K0G2B (DSC, AIS*) -20°C ~ +60°C TX high (25 W) 5.0 A maximum RX Maximum audio 3.3 A maximum 4.0 A maximum (with HM-195) Negative ground 13.8 V DC (10.8 ~ 15.6 V DC) 50 Ω nominal 175 (W) × 110 (H) × 53.6 (D) mm 6.9 (W) × 4.3 (H) × 2.1 (D) in 750 g, 1.7 lb (Not including microphone) DDTransmitter ••Output power: ••Modulation system: ••Maximum frequency deviation: ••Spurious emissions: ••Frequency error: ••Adjacent channel power: ••Audio harmonic distortion: ••Residual modulation: ••Audio frequency response: 25 W or 1 W Variable reactance frequency modulation ±5 kHz Less than 0.25 μ W Less than ±0.5 kHz More than 70 dB Less than 10 % (at 60% Deviation) More than 40 dB +1 dB to -3 dB of 6 dB octave from 300 Hz to 3000 Hz DDReceiver ••Receive system: •• Sensitivity: ••Squelch sensitivity: ••Intermodulation rejection ratio: ••Spurious response: ••Adjacent channel selectivity: ••Audio output power (at 10% distortion into a 4 Ω External Speaker): ••Hum and noise: ••Audio frequency response: Double conversion superheterodyne FM -5 dBμ emf (typical) at 20 dB SINAD DSC (CH 70) -1 dBμ emf (typical) (1% BER) AIS* -114 dBm (typical) at 20% PER Less than -2 dBμ FM More than 75 dB DSC (CH 70) More than 68 dBμ emf (1% BER) FM More than 75 dB DSC (CH 70) More than 73 dBμ emf (1% BER) FM More than 75 dB DSC (CH 70) More than 73 dBμ emf (1% BER) 15 W typical More than 40 dB +1 to -3 dB of -6 dB/octave from 300 Hz to 3000 Hz 105