Icom IC-M510 Instruction Manual - Page 33
Entering the position and time, Deleting an entered ID
![]() |
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7 DIGITAL SELECTIVE CALLING (DSC) D Deleting an entered ID (Example: Deleting an Individual ID: STATION 2) 1 1. Open the "Individual ID" screen. [MENU] > Settings > DSC > Individual ID 2 2. Select "STATION 2," and then push Delete . 3 • "Delete the ID. Are You Sure?" is displayed. 3. Push OK to delete. L Push Cancel to cancel the deletion. 4 • The selected ID is deleted, and then returns to the 5 previous screen. TIP: You can edit an ID and its name by pushing Edit 6 in step 2. 7 ■ Entering the position and time 8 A Distress call should include the vessel's position, date, and time. If no GPS data is 9 received, manually enter the position and Universal Time Coordinated (UTC) time. NOTE: 10 • The manual entry is disabled while valid GPS data is received. • The manually entered position and time is valid only for 23.5 hours, or until turning 11 OFF the transceiver. 12 1. Open the "Position Input" screen. 13 [MENU] > Settings > DSC > Position Input 2. Enter the latitude. 14 TIP: 15 • Select a number or a compass direction using [▲], and [►]. 16 • Select "←" or "→" on the screen, or rotate [CH/ENT] to move the cursor. 17 • Select Next and then push [ENT] or [CH/ENT] to save the selected number. 18 3. Enter the longitude and the UTC time. L See the TIP in step 2 to enter. 4. After entering, push Finish to save, and return to the previous screen. • The "DSC" screen is displayed. 20
![](/manual_guide/products/icom-icm510-instruction-manual-f14c817/33.png)