Icom IC-M510 Instruction Manual - Page 42
Sending a Test call, Close Window
![]() |
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
7 DIGITAL SELECTIVE CALLING (DSC) D Sending a Test call You should avoid testing calls on the exclusive DSC Distress channels and safety calling channels. When you cannot avoid testing on a Distress or safety channel, you should indicate that these are test calls. Normally the Test call would require no further communications between the two stations involved. 1. Push Other DSC . • The "Compose Non-Distress" screen is displayed. L You can also display the "Compose Non-Distress" screen by selecting the "Other DSC" item on the Menu screen. 2. Select "Test," and then push [ENT] or [CH/ENT]. • The Test call is selected, and returns to the "Compose Non-Distress" screen. 3. Select "Address," and then push [ENT] or [CH/ENT]. • The "Address" screen is displayed. 4. Select a station to send the Test call to. L You can also select "Manual Input" to manually enter the calling station. 5. Push Call to send the Test call. L If Channel 70 is busy, the transceiver stands by until the channel becomes clear. 6. When you receive an Acknowledgment: • An alarm sounds. • The screen on the right is displayed. 7. Push Alarm OFF to turn OFF the alarm. • The Acknowledgment information is displayed. 8. Push Close Window . • The received call's information is displayed. • The call is saved in the DSC Log. 9. Push STBY to return to the operating screen. • "Terminate the procedure. Are you sure?" is displayed. 10. Push OK to return to the operating screen. • Returns to the operating screen. 29
![](/manual_guide/products/icom-icm510-instruction-manual-f14c817/42.png)