Icom IC-M510 Instruction Manual - Page 27
AquaQuake Water Draining function, Editing a channel name, CAUTION: DO
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BASIC OPERATIONS 4 ■ AquaQuake Water Draining function Water in the speaker grill may muffle the sound coming from the speaker. The AquaQuake Water Draining function removes water from the speaker grill by vibrating the 1 speaker cone. 2 CAUTION: DO NOT use the AquaQuake Water Draining function when an external speaker is connected. 3 1. Push [◄] or [►] to display AquaQuake . 4 2. Hold down AquaQuake to turn ON the function. • A low frequency vibration beep sounds to drain the 5 water, regardless of the volume level setting. L This function is activated for a maximum of 10 seconds, even if you continue to hold down 6 AquaQuake . 3. Release the key to turn OFF the function. 7 8 ■ Editing a channel name 9 You can edit the name of each operating channel and weather channel, using numbers, uppercase letters, symbols, and a space. This enables easy recognition of the channels 10 or stations. All VHF marine channels are set with default names. 11 1. Push [▲] or [▼], or rotate [CH/ENT] to select the channel to edit. 2. Push [◄] or [►] to display CH Name. 12 L You cannot edit a channel name during Dualwatch, Tri-watch, or a scan. 3. Push CH Name. 13 • The "Channel Name" screen is displayed. 14 4. Edit the channel name. 15 5. Select Finish , and then push [ENT] or [CH/ENT] to save the edited name and return to the operating 16 screen. 17 18 TIP: • Select to enter numbers and letters, and to enter symbols. • Select a number, character, or space using and [►]. • Push [ENT] or [CH/ENT] to enter the selected number or character. • Select "←" or "→" on the screen or rotate [CH/ENT] to move the cursor, or to select the entered character. 14