Icom IC-M510 Instruction Manual - Page 30
Setting Favorite channels, Starting a scan (Except for the NLD version), Channel Group, Example
![]() |
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5 SCAN OPERATION ■ Setting Favorite channels You can quickly recall often-used channels by setting them as Favorite channels. You can set Favorite channels in each Channel Group. 1. Select a Channel Group on the Menu screen. (p. 10) [MENU] > Settings > Radio > Channel Group 2. Push [▲] or [▼], or rotate [CH/ENT] to select the channel. 3. Push [◄] or [►] to display FAV★ . 4. Push FAV★ . • The selected channel is set as a Favorite channel, and " " is displayed. L To cancel the setting, push FAV★ again. TIP: You can set all channels as Favorite channels, clear all settings, or reset to the defaults. By default, some channels are preset as Favorite channels. The preset channels differ, depending on the transceiver version. ■ Starting a scan (Except for the NLD version) Example: Starting a Normal Scan. 1. Select a Channel Group on the Menu screen. (p. 10) [MENU] > Settings > Radio > Channel Group 2. Push [◄] or [►] to display Scan . 3. Push Scan . • The scan starts. • "SCAN" is displayed during a Normal Scan, and "SCAN 16" is displayed during a Priority Scan. • "SCAN" and " " are displayed when a signal is received. L When a signal is received, the scan pauses until it disappears, or resumes after 5 seconds, depending on the Scan Timer setting in "Radio Settings." L A beep sounds and "16" blinks when a signal is received on Channel 16 during a Priority scan. 4. To stop the scan, push Scan . TIP: To properly receive signals, be sure to adjust the squelch to a suitable level. 17
![](/manual_guide/products/icom-icm510-instruction-manual-f14c817/30.png)