Icom IC-M510 Instruction Manual - Page 73
Slow Warn, Function, Speed, Friends List, Friends Alarm, Audible Alarm, Range, Friends
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
AIS FUNCTION 8 zz Slow Warn Friends The GPS receiver calculated COG data zz Friends List of a vessel that is at anchor or drifting is unreliable, and therefore the CPA Displays all Friend targets that you have entered. 1 and TCPA data may not be calculated correctly. If a vessel is anchored in your LL "No ID" is displayed when there is no Friend target. 2 alarm zone, the unreliable data can LL See page 56 for how to set a Friend. cause the collision alarm to sound many zz Friends Alarm 3 times, even if there is no real danger. To prevent this, when the anchored ••Function You can select whether or not to turn 4 vessel's SOG is less than this set value, the Slow Warn function assumes that the following alarm function ON or OFF when a vessel that is entered into 5 vessel's COG is fixed towards your vessel and an alarm will sound. the Friends List is detected. ON: The alarm function is ON. 6 ••Function Turn the Slow warn function ON or OFF. ON: The Slow warn function is turned ON. OFF:T he Slow warn function is turned OFF. ••Speed Set a speed for the Slow warn function between 0.1 and 4.9 kn (in 0.1 kn steps). An alarm sounds, and a popup screen is displayed 7 when a vessel that is entered into the Friends list 8 is detected, regardless of the set range. 9 ON (in range):The alarm function is ON 10 when a vessel that has 11 entered into the Friends list is detected in the set range. 12 OFF: The alarm function is OFF. NOTE: If other vessels at anchor or drifting come into your alarm zone, the Slow warn alarm will sound again. Only if the previous vessel disappears from the Danger list (p. 55), and then re-enters the list, can a new Slow warn or regular alarm sound, depending on the vessel's SOG, or CPA and TCPA. ••Audible Alarm 13 You can select whether or not to sound the Friends alarm. 14 ON: The alarm sounds. OFF:T he alarm does not sound. 15 ••Range Set the range to between 16 0.1 and 6.0 NM (in 0.1 NM steps) for the alarm function. 17 The Slow warn function operates in the same way if your vessel is at 18 anchor and other vessels enter your alarm zone. 60