Icom IC-M510 Instruction Manual - Page 97
Scan Type, Dual/Tri-watch, Channel Group, Call Channel, WX Alert, Voice Scrambler, Favorite CH, Radio
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
MENU SCREEN 10 ••Radio [MENU] > Settings > Radio Scan Type (Except for the NLD version) Selects the scan type. The default setting differs, depending on the transceiver version. LL See page 16 for details. Normal Scan: Scans all Favorite channels in the selected channel group. Priority Scan: Sequentially scans all Favorite channels, while periodically checking Channel 16. Scan Timer (Except for the NLD version) You can use the Scan Timer to pause, or to resume after 5 seconds, when a signal is detected. ON: When a signal is detected on a channel, the scan pauses for 5 seconds, and then resumes. If the signal disappears in less than 5 seconds, the scan immediately resumes. OFF: When a signal is detected on a channel, the scan pauses until the signal disappears, and then resumes. Dual/Tri-watch (Except for the NLD version) Select Dualwatch or Tri-watch. LL See page 18 for details. Dualwatch: Periodically checks Channel 16 while operating on another channel. Tri-watch: Periodically checks Channel 16 and the Call channel while operating on another channel. Channel Group Select the suitable channel group for your operating area. Select USA, INT, or CAN, depending on the transceiver version. LL See page 10 for details. Call Channel You can change your Call channel. The default setting may differ, depending on the transceiver version. LL See page 13 for details. WX Alert For the USA version, an NOAA broadcast station transmits a Weather Alert tone before any important weather information. LL See page 11 for details. ON with Scan: The preset Weather channels are sequentially checked while scanning. ON: The previously selected (last used) Weather channel is checked while scanning. OFF: The Weather Alert tone is not detected. Voice Scrambler LL Displayed only when a Voice scrambler unit is installed. zz Function Turn the Voice Scrambler function ON or OFF. zz Codes Set the Voice Scrambler code to between 1 and 32. In order to understand each other, all transceivers in your group must use the same scramble code, as well as the same scrambler unit. Favorite CH You can set all channels as Favorite channels, clear all settings, or reset to default. By default, some channels are preset. The Favorite channels differ, depending on the transceiver version. LL See page 17 for details. Set All Channels: Sets all channels as Favorite channels. Clear All Channels: C lears all Favorite channels. Set Default: Resets Favorite channels to the default. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 84