Icom IC-M510 Instruction Manual - Page 41
Sending a Group call, Select Msg Type, and then push [ENT] or [CH/ENT].
View all Icom IC-M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
7 DIGITAL SELECTIVE CALLING (DSC) D Sending a Group call A Group call enables you to send a DSC call to only a specific group. L You can send a Group call to a pre-entered group address, or manually enter the address 1 before sending. (p. 19) 2 1. Push Other DSC . • The "Compose Non-Distress" screen is displayed. 3 L You can also display the "Compose Non-Distress" screen by selecting the "Other DSC" item on the Menu screen. 4 2. Select "Msg Type," and then push [ENT] or [CH/ENT]. • The "Message Type" screen is displayed. 5 3. Select "Group," and then push [ENT] or [CH/ENT]. • The Group call is selected, and returns to the "Compose 6 Non-Distress" screen. 4. Select "Address," and then push [ENT] or [CH/ENT]. 7 • The "Address" screen is displayed. 8 5. Select the group to send a Group call, and then push [ENT] or [CH/ENT]. 9 L You can also select "Manual Input" to manually enter the target group. 10 6. Select "Channel," and then push [ENT].or [CH/ENT]. 7. Select the channel to assign, and then push [ENT]. 11 L The assigned channels are preset by default. 12 13 8. Push Call to send the Group call. • "Transmitting Group Call" is displayed, and then the 14 assigned channel is automatically selected. L If Channel 70 is busy, the transceiver stands by until 15 the channel becomes clear. 9. Hold down [PTT] to communicate. 16 17 18 28