Intel SHG2 Product Guide - Page 27
Configuring Chassis Standoffs, Installing Memory
UPC - 735858152891
View all Intel SHG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1. If the server board is not already installed in the chassis, remove the server board from its packaging and place it on a clean ESD protected work surface such as the antistatic plastic packaging in which the board was shipped. 2. Open both DIMM socket levers. 3. Insert DIMM making sure the connector edge of the DIMM aligns correctly with the slot. 4. Check that socket levers are securely latched. DIMMs must be populated in identical pairs. 2 1A 3 1 1B OM13205 Figure 7. Installing Memory Configuring Chassis Standoffs If your chassis does not have standoffs placed as shown below, you must rearrange them so they match the holes in the server board. Failure to properly rearrange the metal standoffs may cause the server board to malfunction and may permanently damage it. Your chassis may be different from the illustration. For the Intel SC5200 chassis: 1. Install standoffs in positions 5, 18, S, 19 and in the eight positions marked P. Standoffs are included with your chassis. Standoff numbering in other chassis may be different. 1 P P 20 P P P P 4 P P 23 18 S 5 6 19 26 Figure 8. Configuring Chassis Standoffs OM14362 Server Board installation 27