Intel SHG2 Product Guide - Page 36
Cable Routing – Intel® SC5200 Base Chassis, Intel, SC5200 Base Server Chassis Note
UPC - 735858152891
View all Intel SHG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Intel® SC5200 Base Server Chassis Note Connect front system fans to the System Fan 3 and System Fan 5 connectors on the server board. Intel SC5200 Hot-Swap, Redundant Power Server Chassis Note Be sure to attach system fans to their correspondingly numbered connector on the server board. System fan numbers can be found on the system fan carrier and on the system fan cables. Cable Routing - Intel SC5200 Base Chassis To ensure proper air-flow within the chassis, follow the cable routing guidelines below. IDE or SCSI Cables Cables that connect to devices in the lower device bays should be routed around the epac system fan carrier as shown below. 1. Route cables as shown. 2. Replace the top half of the epac. Figure 21. Routing Cables OM14556 36 Intel Server Board SHG2 Product Guide